Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 months later...

Sorry guys, been out of the country so much this year and i'm back now for at least a few months.

Updating this thread, rods and pistons sold, everything else still available.

Items located in Brisbane.

Bare Head, just rebuilt, new seats, valve grind, light port, hardness checked, smoothed bowls $1000 Great for 25/30 swap!! Can provide std cams, includes cam covers and valley cover, recently powder coated.

Tomei Poncams 256 inlet/exhaust 8.5mm lift $700 includes adjustable cam gears

Performance springs to suit above cams and capable of controlling 10mm+ lift $200

6Boost manifold to suit GT25 flange on the HKS3037 turbo $800. Changing from another aftermarket manifold to this, picked up 30hp alone with no changes to boost or timing!!!! Suit turbosmart wastegate. Ceramic coated by Competition Coating

HKS 3037S 56T with 0.74 ex housing. This is rated at 480hp. My engine was making 430rwhp on 19psi on PITS dyno. I will include all the dash fitting and lines for this to bolt up to your 25. This is oil & water feeds and returns and oil return to sump. You need to tap your block for these to fit. Will also throw in the 3 inch dump from turbo to under the car, suits S13 series car although i imagine it would also fit a R33 but you' need to check it.

Turbo has just been rebuilt by GCG after a gasket failure, and has done barely 50km. Exhaust housing also cermaic coated by Competition Coatings. This thing is brand new again! Grab yourself a bargain, get the real HKS item $2500

Turbosmart Progate 48mm wastegate $400

Ryal inlet manifold, individually machined bellmouths, standard tb 5.2 litre capacity, injector holes modified to suit top feeds. $1000

550cc injectors with fuel rail $700 New o rings as of last month!

UPDATE

RB25 Head just rebuilt, new seats, valve grind, exhaust valves guides light port includes Performance Springs with standard cam$1000 Great for 25/30 swap!!

Tomei Poncams 256 inlet/exhaust 8.5mm lift $700 includes adjustable cam gears SOLD

6Boost manifold with GT25 flange, ceramic coated $800

HKS 3037S 56T with 0.74 ex housing $2500

Turbosmart Progate 48mm wastegate $400

Turbo, 6boost & wastegate package $3000

Ryal inlet manifold, individually machined bellmouths, 5.2 litre, injector holes modified to suit top-feeds incl fuel rail $800

550cc injectors$600

  • 1 month later...

This stuff needs to go.

I'll now offer the lot for $3500, complete top end package, rebuild head new turbo great manifold, come get yourself a bargin.

[email protected] email me if you still have the manifold

This stuff needs to go.

I'll now offer the lot for $3500, complete top end package, rebuild head new turbo great manifold, come get yourself a bargin.

This stuff needs to go.

I'll now offer the lot for $3500, complete top end package, rebuild head new turbo great manifold, come get yourself a bargin.

Just re-stating, the head has less than an hour since rebuild, light port new valves stems exhaust guides and performance springs.

6 boost manifold with GT25 flange for HKS turbo

HKS 3037S56T -rated at 480hp. Rebuilt, has done less than 1 hour.

Turbosmart 48mm progate.

Ryall inlet manifold, individual bell-mouths and modded to accept top feed injectors.

Included -all water/oil lines for turbo are real aircraft braided lines and fittings.

$3500 the lot!!

Edited by Simonster
Are the injectors included? What brand are they?

They weren't, but if you want the lot, then i'm prepared to throw them in for another $200.

They are series 5's purchased from Mazfix

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey everyone. Is there a way I can get the original window sticker (maroney label) for my 1995 R33 GTST? I doubt I’ll be able to ever get it but it’s worth a shot to ask
    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
×
×
  • Create New...