Jump to content
SAU Community

Recommended Posts

I would take anything that comes from Fudzilla with a heavy grain of salt. It's like Woman's Day of the PC world.

I'm honestly not convinced these will be viable even if it's true.

Given the price of a 60GB SSD, you could run the O/S off that and then just jab 4TB (1TB 7200rpm drives) into a RAID array and it wouldn't be far off a WD Velo and you'd have a nice amount of space to go with it all and a O/S that would be faster due to the SSD.

Given whats been released in the US the past couple of weeks - SSD prices in a couple of months should start getting closer to reasonable.

A 60GB SSD + a raid array of 7200

or

300GB Raptor + whatever

First one will be much more responsive to use :P

Given whats been released in the US the past couple of weeks - SSD prices in a couple of months should start getting closer to reasonable.

A 60GB SSD + a raid array of 7200

or

300GB Raptor + whatever

First one will be much more responsive to use :laugh:

Only one will lose ~20% of it's perfomance within 6 months.

Oh now now now... that is wrong and you know it. :woot:

A TRIM enabled drive will never degrade.

Even if you dont have a TRIM drive there are ways to clean it up back to 100% working efficency very easily :D

So till SSD then all the way?

On Toms hardware a lot of the testing showed not a huge amount of difference between the raptor and the Caviar black FASS 2TB edition. makes ya wonder, put 2x2TBs in raid format and see if there is much of a comparison at all, price would be pretty good and you would score 4TB compared to 600GB

I have always wanted a raptor though :-)

Of course SSD's are the way - get one with TRIM and you are home free.

Just get a 60/80gb SSD and run the games/OS off that, it'll load faster than the stupid windows sounds play :thumbsup:

If you want mass storage + speed in a network style setup where you are sending large files just mash half a dozen 1.5TB drives together in RAID5.

Don't use onboard though for that much, get a proper hardware raid and it'll be stinking fast for 7200rpm drives.

I can't see a market anymore for Raptors anymore now that you can get SSD's.

They are to expensive on a $$/GB range compared to 7200rpm drives.

They are slower when compared to a SSD

They are just the odd man out now IMO.

Money saved from buying a SSD + RAID 7200s would work out cheaper overall than Raptors + Raptors.

And it would be faster still than Raptors + RAID 7200s. You'd have slightly less space with the SSD route but who cares? Space is unimportant.

I never said to put em on a HDD.

The idea is get a 60GB (ideally 120GB), and then the HDD's are storage.

You'll have near instant load times... with the Velo's you'll still have load times etc.

Not convinced. I have a Raid 5 array of 4xWD 640GB 7200RPM drives (WD6400AAKS with 2x320gb platters, the most efficient 7200rpm drives.) For a grand total of $400. The boot/swapdisk partitions are striped across the inside of the platter, with larger storage areas towards the outside.

The way i see it, each of those have a 3Gbps throughput, which gives me a theoretical max of 12Gbps. Not that I'd ever see it IRL.

This was before SSD's got cheap. Waiting for PCI-E RAM adaptors to become available at normal prices so I can move the swapfiles onto 8GB of RAM.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...