Jump to content
SAU Community

Recommended Posts

Hey guys, due to financial reasons we've decided to get rid of our mkiv supra.

We need to get rid of it to pay off the rest of the loan due to being very broke lol.

The car is almost completely unmolested except for 18"rims and stereo system

and is my girlfriends daily driver as she can't drive a manual :-).

Car:1993 Toyota Supra

Location:Sunnybank Hills, Brisbane

Colour:Black

Trans:Auto

Engine:2jz-ge (NA)

Km's:165,xxx

Other:

Positives:

Has a set of 18" rims with 2 rear tires needed due to an earlier camber problem. Have receipt if needed.

Fronts 225/45/18 rear 264/35/18. Also has a pioneer mp3 head unit and alpine type-r speakers

front and back. Only serviced 2000km ago.

Negatives:

I assume the o2 sensor is on its way out as the engine light comes on when slowing down but goes off

when you start accelerating again.

The drivers side power seat stopped moving forward but seat is as far back as it goes and is still easy for my gf to drive.

Has a foot long scrape on the passanger side rear quarter from the mirror on my civic when she reversed out and didn't

see it.

price: $15,000 ono

She paid just under $20K for it a 2 years ago at an importers in slacks creek.

The car drives perfectly and handles well due to the larger tires. Perfect for a p-plater to pass the time on and still be

driving a nice car. The car currently has my rx7's 18's on the back but will come with the pair to match the front.

Will be sold as is, with no rwc as we don't have the money to replace the tires etc. Car is registered till some time

during june and will be sold with rego still on it. Car is driven daily and can be inspected and test driven upon

request. Any other info needed? Just pm me.

Will try to get some pics before the weekend.

Link to comment
https://www.sau.com.au/forums/topic/315560-fs-mkiv-supra-na-auto/
Share on other sites

bump.

going panel beaters to get scratches and scrape removed next week and had the scan tool put on and it reads no fault codes. the mechanic said it may be faulty brake fluid level sensor as they are apparently a common problem.

bump.

have a set of bilstein coilovers going in next weekend and faulty brake fluid level sensor replaced. car will now also be sold with a rwc too.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...