Jump to content
SAU Community

Recommended Posts

Hi,

I am currently selling the following items:

1). Complete HKS GT3037 Pro S 480HP Full Bolt on Turbo Kit for the RB25 $1600

I purchased it from The Japan Parts Specialist and it retails for $4300 Delivered I am asking $1600 full specs can be found by clicking the below link:

http://www.jappartsspecialist.com/product_...products_id=321

The turbo has a 0.63 Rear, Is internally gated and has the Heavy Duty 10PSI HKS Actuator on it (I Run 18PSI)

It has done less than 10,000KMS as it is on my R33 that i only ever take out a couple of times a month as I have a second vehicle.

Now getting to why it is so cheap....

After pulling the turbo off my car i noticed that some of the turbine wheel blades were slightly bent as something has ovbiously gone through the exhaust housing of the turbo at some stage (I realise now a year on after taking my car to an exhaust shop complaining of a rattle comming from the cat and them locating a nut, that it was what caused the damage)

This turbo has barley any shaft play what so ever but it is a ball bearing turbo and is a little noisy and spools slightly later than it did previously. This turbo in its current condition made 353HP down from the 370HP or so it did when it was first installed, the turbo was mounted to the standard manifold and had the standard intake manifold.

I have been quoted $1000-$1100 for it to be rebuilt however as i was previously asking $3000 for the kit but taking into consideration that it will require a rebuild to be in perfect A1 condition im taking the majority of the cost of the rebuild out of what I was previously asking.

You could use it as is (like I had been doing for a year) and it will be a dam cheap turbo upgrade or for $2600 you will have a rebuilt HKS Full bolt on kit that retails for $4300 delivered.

As you can see from the below pictures the turbo is in great condition.

I will be listing it on ebay as well, so first in best dressed really, im not open for offers, the price is $1600 + Postage take it or leave it.

14ky69y.jpg

3451o5h.jpg

2isi9ex.jpg

72de9j.jpg

2vu0hus.jpg

5eyd84.jpg

2yzhab6.jpg

2). Set of R33 S1 Coupe (black) lights $300

Average condition, just like nearly other set of R33 S1 Lights

jufi0y.jpg

3). R33 Alloy Intercooler Piping $100

HPI Intercooler Piping Kit

j0w408.jpg

4). 2 x Sets of standard Coil Packs for R32 and R33 S1 $60 a set

2hmzbrb.jpg

Edited by SLYDA

No Problem, Ill get them out too you Monday (your aware I guess that a 3" Hole needs to be cut on the drivers side for the pipe to pass through)?

This is pretty much standard for a R33 intercooler kit unless you buy a specific return one like one made by cooling pro etc

Ive attached the installation instructions for you in a PDF hope it helps :).

hi buddy. just bought and paid for the cooler piping kit and the s1 coilpacks via ebay & paypal. thanks :(

Im on the gold coast, I have one set of the coil packs left.

Both the headlights and the remaining set of coil packs are listed on ebay.

sup buddy just wondering where abts u from interested in the packs n head lights willing to pick up if in melb pm me

Headlights $250 (Noticed grill clips have been removed).

Turbo dropped to $1500

6 x STD Coil Packs $60

Once again all items updated on ebay to reflect pricing change.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...