Jump to content
SAU Community

Recommended Posts

post-32345-1270787116_thumb.jpg

Driving Sport inc

Twilight Drift Friday 23 rd April

So U Think U Think U Can Slide, DRIFTING

In association with

Burnout Mayhem

So U Think U can Bake, Burnouts

Back again for the monthly madness

Driving Sports inc Twilight drift at Eastern Creek Raceway turns 9 to 12

Entry fee 250 non members + CAMS $25 ,220 members

Driving Sports inc Twilight drift at Eastern Creek Skid Pan (wet)

Entry fee $150 + CAMS $25 non members ,$110 members

Driving Sports inc Twilight drift at Eastern Creek Figure 8/peanut (dry)

Entry fee $150 + CAMS $25 non members ,$110 members

Burnouts

Twilight Burnouts Eastern Creek Raceway Burnout pad (near turn 1)

Entry $ 90 + CAMS lic $25

Entries will be capped

So book now

Entrants will receive one pit crew pass and one pit/ paddock car pass

On track activities start at 6 pm and end at 10 pm

Scrutineering. For entrants starts at 4:45 pm at gate 7

Heaps of action for drivers and spectators With 3 different dedicated drift areas, burnouts , DJ and light show in the pits give a ways/prizes, hire a drift car

you wont be board plus more

Entry fee $20 for spectators

To book email [email protected]

More details for driving entrants go to http://www.drivingsp...m.au/forum.html

post-32345-1270787116_thumb.jpg

Driving Sport inc

Twilight Drift Friday 23 rd April

So U Think U Think U Can Slide, DRIFTING

In association with

Burnout Mayhem

So U Think U can Bake, Burnouts

Back again for the monthly madness

Driving Sports inc Twilight drift at Eastern Creek Raceway turns 9 to 12

Entry fee 250 non members + CAMS $25 ,220 members

Driving Sports inc Twilight drift at Eastern Creek Skid Pan (wet)

Entry fee $150 + CAMS $25 non members ,$110 members

Driving Sports inc Twilight drift at Eastern Creek Figure 8/peanut (dry)

Entry fee $150 + CAMS $25 non members ,$110 members

Burnouts

Twilight Burnouts Eastern Creek Raceway Burnout pad (near turn 1)

Entry $ 90 + CAMS lic $25

Entries will be capped

So book now

Entrants will receive one pit crew pass and one pit/ paddock car pass

On track activities start at 6 pm and end at 10 pm

Scrutineering. For entrants starts at 4:45 pm at gate 7

Heaps of action for drivers and spectators With 3 different dedicated drift areas, burnouts , DJ and light show in the pits give a ways/prizes, hire a drift car

you wont be board plus more

Entry fee $20 for spectators

To book email [email protected]

More details for driving entrants go to http://www.drivingsp...m.au/forum.html

link at the bottom doesnt work?

  • 2 weeks later...

TWILIGHT DRIFT & BURNOUT MAYHEM

Friday Night - Eastern Creek

The 23rd is shaping up to be a big one

with 3 different sections to drift

and ripping a burnout to show the v8 guys a thing or two

the count down is ON, less than 2 DAYS to be ready

will you and your car be ready ??

will you be there ???

you dont wanta miss the action !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Over 50 different drifters will be there, to get the biggest angle, fastest and longest slide they can possibly hang on to.

If thats not enough to get you to come drive or cheer on your favourite drifter come for your chance to;

WIN one of 30+ giveaways, ranging from a HDI electronic boost controller to a Driving Sports shirt or GCG gift bag or a selection of Elf Lubricant products, plus more

post-32345-1271904344.jpg post-32345-1271904355.jpg

post-32345-1271904374_thumb.jpg

Wanta get a piece of the action for yourself, then enquire NOW to hire a drifter and show us your slides or get in practise time & drifting tips

I will be there, to tag onto one of the drift trains, and to see some of the highest entry speeds in NSW .

Whatever your reason is for coming out

You know you dont want to miss it!

Friday 23rd April at EC

See you there



  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...