Jump to content
SAU Community

Recommended Posts

I have another post in regards to selling this engine as a whole, but cant be bothered waiting now so im just gonna start parting it out now, still wiilling to sell the engine as a whole if anyone interested but heres the list.

(the head is still attached to the block but will take apart if there are buyers for it otherwise ill keep it together until it does get sold)

If my prices are unjust just throw me an offer and we'll see, bu no low balling offers plz, will post some parts and maybe larger items if u organise the courier.

Head incl: complete except for the bolts holding in the rocker covers, also missing the bolt that holds the vct bit on the intake cam gear. $400

Block: Pistons still in just needs head if you are not buying the head i have no pumps, has water pump and water pump, i knw the water pump is still in vgc, havent taken oil pump yet but should be fine to use again. $500

Power steering pump with bracket: vgc no problems. $50

Alternators x2: ones an rb30 one is bit dirty, both work fine. $100 each

stock exh manifold: vgc $50

Intake plenum + runners + throttle body +tps series 2: vgc comes with bolts and gaskt for it. $110

Tomei metal head gasket: brand new 87mm and 1.2mm thick. $400

OS giken / Cusco super single clutch: roughly 75-85% meat left on it the plates look fine was running great on the car b4 taking it off. $600 ono

So far thats all i can think of if i think of anything else ill add it later or just ask me wat u want i might have it.

Pm or txt to my mob 0414424902

Cheers

Lok

OK need to pay for my new ecu n tune so i need as much of this gone asap

also

Series 2 coilpacks for rb25det $110ono

rb20det coilpacks $70

hello, id be keen on coil pack loom if good,./ injector/injectors../coils packs/ turbo/?

hey mate i only have the coilpacks in ur list sorry, might have the inj loom but yea if ur keen pm me or gimmie a txt if u can pm

bump

the block is on hold atm but the head is still attached, will knw by around monday arvo if its sold or not.

the guy hasnt gotten back to me yet so i assume his not wanting it so the block is still avail (with head still attached)

will swap for slotted front rotors for r33 gtst maybe cash adjustment depending on what you want

some items will post for free depending on what you want

Hey mate, will you sell the throttle body seperate from the manifold?

hey mate i prob wont want to separate it would like to keep it whole in case someone wants the whole thing.

any idea what the clutch is rated to?

hey mate i got 304rwkw on my car and held it fine didnt slip at all. but apparently its rated to 400ps

I have another post in regards to selling this engine as a whole, but cant be bothered waiting now so im just gonna start parting it out now, still wiilling to sell the engine as a whole if anyone interested but heres the list.

(the head is still attached to the block but will take apart if there are buyers for it otherwise ill keep it together until it does get sold)

If my prices are unjust just throw me an offer and we'll see, bu no low balling offers plz, will post some parts and maybe larger items if u organise the courier.

Head incl: complete except for the bolts holding in the rocker covers, also missing the bolt that holds the vct bit on the intake cam gear. $400

Block: Pistons still in just needs head if you are not buying the head i have no pumps, has water pump and water pump, i knw the water pump is still in vgc, havent taken oil pump yet but should be fine to use again. $500

Power steering pump with bracket: vgc no problems. $50 SOLD

Alternators x2: ones an rb30 one is bit dirty, both work fine. $100 each

stock exh manifold: vgc $50

Intake plenum + runners + throttle body +tps series 2: vgc comes with bolts and gaskt for it. $110 SOLD

Tomei metal head gasket: brand new 87mm and 1.2mm thick. $400

OS giken / Cusco super single clutch: roughly 75-85% meat left on it the plates look fine was running great on the car b4 taking it off. $600 ono

RB25DET series 2 AFM: vgc $100

So far thats all i can think of if i think of anything else ill add it later or just ask me wat u want i might have it.

Pm or txt to my mob 0414424902

Cheers

Lok

hey mate i got 304rwkw on my car and held it fine didnt slip at all. but apparently its rated to 400ps

Im aiming for 350rwkw so that clutch dosnt leave me a lot of head room.

Im aiming for 350rwkw so that clutch dosnt leave me a lot of head room.

thats alright mate no probs, ur prob better getting a twin plate for that power to be safe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • Remember this is 1988 tech.
    • Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
    • meh, it was a good video, clear about the issue and how he dealt with it. A bit heavy on the RTV and very brave to put an RB in anything without rebuilding it first, but otherwise I thought it was good Dose, I'm not sure that having the pickup forward is a big issue; yes of course the oil could shift under brakes but the sump should never be empty enough for that to be a problem (unless you also have a higher volume oil pump, and that oil can't return from the head to the sump quickly enough)
×
×
  • Create New...