Jump to content
SAU Community

Recommended Posts

hey guys - this shouldn't be too big of a problem i think...

basically... a31 cefiro.. most / all power window componentry is replaced or new... except today while driving i was winding up my passenger and passenger rear windows and they stopped mid way... i thoguht hmm weird mustn't have done it right pressed it again and they went up

it did this like 2 maybe 3 times

by this stage i'd recognised it's obviously a connectivity / electrical fault not a motor fault... if it was motor they wouldn't work AT ALL not just stop half way then start again

but now my windows will not come down whatsoever now all three non-driver windows are stuck "up" and won't come down... but driver window works perfectly on both the "auto down/up" switch and the regular switch

but the other three windows will not work from either the driver master control, or their own respective controls...

WHAT WOULD BE CAUSING THIS!?!?!

please tell me it's only a fuse somewhere... i'm a bit of an auto electrical noob so please help me!

i haven't got time to check cefiro forums all day so if you reply or just wanna send me an sms regarding this plleleeeasseeee let me know on 0404 756 446 thanks for the advice or help in advance guys

Definately not fuse related.

Check the connection on the back of the drivers side control.

If that fails, bring your car around and we'll try resoldering the board.

Almost every eletrical fault I've had in a Nissan has been to do with bad solder joints done by the machines in the factory.

cheers guys sorry for the late reply - like i said don't check back here often LOLLLLLL.

okay so can one of you help me out? i'll make you dinner. no kidding.

haha

or buy you a beer or three - beer you never tried before - really good beer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...