Jump to content
SAU Community

Full Manual Conversion Kit For R33 Skyline Rb25det

bazr33

By bazr33,
in Classifieds

 Share

Recommended Posts

bazr33 Mentor

bazr33

Posted
Posted

Turbo 5 Speed Gearbox P/C

Flywheel

Heavy Duty Pressure Plate and Clutch in great order

Clutch and Brake pedals

Gearbox Master and Slave cylinders

Manual Tailshaft - front half

Crossmember

Gear lever

be quick - $1200. No Offers Pick Up Only

post-14294-1271588181_thumb.jpg

rabs_33gtst Collaborator

rabs_33gtst

Posted
Posted

Hey mate, any problems with the box itself? Oil leaks, difficutly changing gears, damage from removal etc....reason for sale? good price though so am interested to hear back asap...

thanks

barretdenis Enthusiast

barretdenis

Posted
Posted

Gearbox perfect no leaks or synco issues. I bought my son's R33 and converting it back to an Auto. Any other questions you can call me on 0403829350

  • 2 weeks later...
32_Dave Mentor

32_Dave

Posted
Posted
Does this fit a rb20 ?..

into a r32 ..

?

thanks, sorry, kinda new to skylines

could if u wanted a stronger box. yes will work, also good option if you want to upgrade to rb25 or 6 later down track. will need to mod speedo drive tho.

bazz: split the electronic speedo sensor?

  • 5 months later...
  • 4 weeks later...
bazr33 Mentor

bazr33

Posted
  • Author
Posted

bump, The box thats included in the kit is actually a rb20det gearbox not a rb25.

The kit has everything there however and works perfectly to convert into a r33, as I had it in a r33 previously.

Price drop accordingly to 700 bucks.

  • 2 weeks later...
barretdenis Enthusiast

barretdenis

Posted
Posted

bump, The box thats included in the kit is actually a rb20det gearbox not a rb25.

The kit has everything there however and works perfectly to convert into a r33, as I had it in a r33 previously.

Price drop accordingly to 700 bucks.

SOLD..............................

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...