Jump to content
SAU Community

Rb26 Split Dumps

endless
 Share

Recommended Posts

endless Proficient

endless

Posted
Posted (edited)

Got a set of split dumps for an RB26 for sale

They are the HKS replica ones as JJR sell (http://justjap.com/store/product.php?productid=16978&cat=0&page=5)

One of them has been modified slightly with a hammer to fit as can be seen in pic - they were removed from an R32 GTR

14cwms9.jpg

$250

Edited by endless
Link to comment
https://www.sau.com.au/forums/topic/317533-rb26-split-dumps/
Share on other sites
endless Proficient

endless

Posted
  • Author
Posted
whats the inside diamater of the outlet ?

60mm

factory location? will this bolt up to an existing front pipe setup without drama on a 32R?

Yes will bolt onto factory turbos as were fitted to N1's. Should fit to factory front pipe without a problem as they are stock replacement dumps.

  • 4 weeks later...
whiteboy01 Collaborator

whiteboy01

Posted
Posted
200 inc post

If anyone worried that the dented part will affect performance - it won't at all as where the split joins - the hole is smaller than the pipe diameter.

Low ball of $100

abit sus of the dent =S

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • thatjawncrazy
      Another "where do these lines and plugs go" RB25DET question

      By thatjawncrazy · Posted

      GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Stringycheese
      Blue slip

      By Stringycheese · Posted

      Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • PranK
      Blue slip

      By PranK · Posted

      Should have asked what is the car?
    • PranK
      Blue slip

      By PranK · Posted

      I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...