Jump to content
SAU Community

Recommended Posts

Hey guys,

I'm putting my 19's up for sale too upgrade to 20's and something more baller. :D

Work VS-XX's or something along the line, mesh type.

Item: 19" Evolution Intensive Hunks in Chrome.

Offsets/size: 19x9.5 +17 Fronts wrapped in Nexen N3000 245/35/19 90% Tread,

19x11 +10 Rears Wrapped in Kumho KU19 275/30/19 70% Tread, (Have been flipped, so another 12-14000km's pending camber)

Condition: 1 of front and rear Have no Gutter rash but little scratches and that in the dish.

The other front has tiny bit of gutter rash not that noticible until very close looking at it, also has a tiny nick out of the rim.

The other Rear has Gutter rash almost around the rim, Its not severe nor is it tiny but noticible.

Price: Im after $2800.00 for these bad boys

Contact: Pm me or call/txt 0402153919 for a faster response.

To those who want to fit these to your V35/350z.

They will fill the guards awesome, but if your car is lowered i would suggest you roll your rear guards (fronts are fine),

unless you like the guards munching away your tyres and end up popping the tyres.

Standard height they are fine but still scrub on the odd big bump.

Will take the wheels off sometime this week an get proper pics.

intensivehunk.jpg

35beeDishh.jpg

Nightcrawler edited the rear tyre size for you ;)

Link to comment
https://www.sau.com.au/forums/topic/318341-fs-19-intensive-hunk-wheels/
Share on other sites

  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...