Jump to content
SAU Community

Recommended Posts

Hey guys,

I just bought a stock standard R33 GTR from the USS auction in Japan.

I got it for 594000 JPY which is equivalent to $15000 NZD landed.

The car is GRADE 4 has done 124000 kms and has only had 1 owner in Japan.

My questions are:

1) Is that high mileage for a GTR?

2) I heard that around the 120000 kms mark, you have to rebuild the bottom end bearings?

3) What are some known issues with the R33 GTR?

I have attached some pictures of the actual car.

post-73091-1272753779_thumb.jpg

post-73091-1272753790_thumb.jpg

Edited by Ninjabread Man
Link to comment
https://www.sau.com.au/forums/topic/318883-importing-a-r33-gtr/
Share on other sites

yeah seems so, mines got 25k more kms than yours and its going strong (might need new turbos soon though)

it looked like a series 3 because of the xenons and black front lip but i guess they were options on the earlier ones too

It's series 1, no xenons and deeper front lip.

Good buy, mileage is nothing cos it's a 15 year old car after all... Hell, I've seen GTR with '40,000km' with numerous wear and tears.

Log books?

It's series 1, no xenons and deeper front lip.

Good buy, mileage is nothing cos it's a 15 year old car after all... Hell, I've seen GTR with '40,000km' with numerous wear and tears.

Log books?

Unsure about the log books, will email the agent tomorrow.

Is there any problems with the R33 GTR's that I should know about?

I know that they have leaky boot problems as I have a R33 GTS25t myself and it had this issue.

Would it be as or if not more reliable then my GTS25t?

I have 33 GT-R and I use it as my daily driver, I haven't got any issues apart from broke a intercooler piping clamp (was told it's pretty common) when I was driving in twisties.

You have a grade 4 car, shouldn't have any issues and do a 100,000km service on it to be safe. Just overfill the oil to the hump on dipstick if you're doing trackdays, do a search on this forum for more info.

I don't have leaky boot on my GTR though but my old GTS25t had and it was coming out of taillights.

As for reliablity, if maintained well it'll be reliable just like GTS25t really.

I have 33 GT-R and I use it as my daily driver, I haven't got any issues apart from broke a intercooler piping clamp (was told it's pretty common) when I was driving in twisties.

You have a grade 4 car, shouldn't have any issues and do a 100,000km service on it to be safe. Just overfill the oil to the hump on dipstick if you're doing trackdays, do a search on this forum for more info.

I don't have leaky boot on my GTR though but my old GTS25t had and it was coming out of taillights.

As for reliablity, if maintained well it'll be reliable just like GTS25t really.

Sweet thanks for the info.

How many KM's has your GTR done?

I'm pretty stoked that I got this for $15000 NZD landed and complied as the ones here in NZ go for around $24000 to $26000.

Sweet thanks for the info.

How many KM's has your GTR done?

I'm pretty stoked that I got this for $15000 NZD landed and complied as the ones here in NZ go for around $24000 to $26000.

My GTR has done 95,000 but that is on Nismo Combination Meter though.

$15k NZD is $11,783 AUD!, yes I'd be stoked with the price!

And didn't NZ decide to stop import of cars that are older than 1996 or thereabouts?

And didn't NZ decide to stop import of cars that are older than 1996 or thereabouts?

Yeah but there is a new Special Interest Vehicle law.

http://www.nzta.govt.nz/resources/factshee...t-vehicles.html

The R33 GTR meets all of the following criteria:

# The vehicle's make and model has been (or was) manufactured in annual volumes of 20,000 units or less.

# The vehicle is, and was manufactured as, a two-door coupe or a convertible.

# The vehicle is, and was manufactured as, a high-performance vehicle.

The only issue of getting a car under a SIV permit is "A special interest vehicle cannot be sold or leased within four years of its registration in New Zealand."

So the oldest you're aloud to import is 1996?

My parents were over there early this year and they saw too many old cars there, the amusing thing was they rented a 1996 Toyota Corolla!

So you could still import anything else there?

So the oldest you're aloud to import is 1996?

My parents were over there early this year and they saw too many old cars there, the amusing thing was they rented a 1996 Toyota Corolla!

So you could still import anything else there?

No you can't import cars under 2001 now.

Fortunately, every GTR (R32, R33 and R34) meet the SIV law criteria and can be imported :)

No you can't import cars under 2001 now.

Fortunately, every GTR (R32, R33 and R34) meet the SIV law criteria and can be imported :)

Ah what about GTST/GT-Ts?

Also I once looked trademe, one seller noted that it's illegal to import 32 GTR to NZ without firewall modification, is this is the case?

OP, sorry for off topic, but I'm curious about how importation to NZ works.

Ah what about GTST/GT-Ts?

Also I once looked trademe, one seller noted that it's illegal to import 32 GTR to NZ without firewall modification, is this is the case?

OP, sorry for off topic, but I'm curious about how importation to NZ works.

I'm not sure if GTST / GT-T's would comply as I don't know the production figures of them.

Anyway, you can't sell the car for four years so if you get bored with the GTST / GT-T and you want a GTR, then bad luck.

You can register a 1989 BNR32 under a classics car law which means that it doesn't have to meet frontal impact and emission standards. 1990 and over will have to meet emissions so the only way to import 1990 and above GTR's, is with a SIV permit.

Raymond,

Thanks for anwering my questions and explaining how importation process works 'across the ditch'

4 years is a long time to own a car (longest I've owned was 28 months), thank god I live here in Australia...

Cheers

Grant

Congrats mate. Some great roads in NZ to test it out on :(

As Grant said get a 100K service done and make sure the cooland and brake fluid are changed too. The coolant had gone bad on two of the GTRs we've bought that were imported straight from Japan.

Mine's done 105,000km now (bought it in Oct 05 with 45,000) and it's still tight as a drum, but being mostly stock it's a fairly un-stressed motor.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...