Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model:Skyline R32 GT-R

Milage:101,000

Transmission: Manual

Colour: Blue

Location:Warrnambool Victoria

Complied?Yes

RWC supplied? No

Currently registered?Yes

Price:$15000 obo

Contact: Chris 0438 556282

Comments / Modifications:Lots

Images:pics

Selling my 32 as I need a house deposit ASAP. Car is priced at $15k but I am very open to offers. Car is in good condition, but does not come with a roadworthy

so I will take that into consideration price wise.

The car has some sort of gearbox issue at the moment, still drives fine, but I have noticed that after a long drive the car makes a clunking sound at very low speeds.

This goes away if the car is left to cool down for a little bit. I havent had time to get this checked out but again I will take this into consideration price wise.

The car has the following mods:

Stage 1 RB26 motor from Racepace Motorsport in Melbourne, guaranteed to handle up to 400kw at the wheels. Consists of the following:

Crack tested and prepared block with oil gallery mods

Ported head with new valves, valve guides and oil gallery mods to eliminate oil surge

Forged pistons and rings

Resized rods

Nismo Bearings

New r34 crank

New water pump

New N1 oil pump

All fully balanced and blueprinted

Larger capacity aluminium radiator

Turbos and Exhaust

2x Garrett GT2560's, rated at 350hp each. Turbos are good for around 25psi, currently running 18psi making 297rwkw

Xforce Dump pipes

3" front pipe

3" Exhaust from cat back with 4" muffler.

Hybrid Intercooler

Electronics

Apexi Power FC and hand controller

Greddy Profec B spec II boost controller

Alpine Stereo

Full Nismo instrument cluster - white face gauges

Driveline/Suspension/Brakes

Brass button clutch - zero slippage

TEIN Super Street Coilovers

DBA 4000 Rotors up front with Ferrodo Formula brake pads

Standard GT-R rotors and pads on rear.

I think thats about it, if I think of anything more I will post it up. This car has been my pride and joy and as such it has been well looked after.

I have been the only owner of the car in Australia and have owned the car for around 5 years.

The car has been serviced every 5000k's either by Racepace or a licensed mechanic using Nismo oil filters and Castrol Edge oil. No expense has been spared on maintenance. The new motor has travelled around 25000k's

and I have had no problems with it. The only thing really left to do on this car is put some bigger injectors and fuel pump into it. I have been told that on around 22-24psi it should make 350rwkw.

I am asking for $15000 or best offer. Price is again, negotiable.

Thanks for looking guys.

post-12308-1272926161_thumb.jpg

post-12308-1272926369_thumb.jpg

post-12308-1272926422_thumb.jpg

year model and pics of engine and interior please

It's an 89, I'll post some interior pics up tomorrow when I get home from work

oooo one last thing how many km is on the car you say there 101,000 but on the dash there 114.000 ??????

I think chris was ment to put 114,000 and the engine bay just needs a clean and a polished.

also chris hasnt had time to get the gearbox checked out. its a 3 hour drive to racepace.

for the price this is a bargain

I've been told that the gearbox noise is probably just the fluid needs replacing with a thicker fluid that stays thicker when its hot.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...