Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model:Skyline R32 GT-R

Milage:101,000

Transmission: Manual

Colour: Blue

Location:Warrnambool Victoria

Complied?Yes

RWC supplied? No

Currently registered?Yes

Price:$15000 obo

Contact: Chris 0438 556282

Comments / Modifications:Lots

Images:pics

Selling my 32 as I need a house deposit ASAP. Car is priced at $15k but I am very open to offers. Car is in good condition, but does not come with a roadworthy

so I will take that into consideration price wise.

The car has some sort of gearbox issue at the moment, still drives fine, but I have noticed that after a long drive the car makes a clunking sound at very low speeds.

This goes away if the car is left to cool down for a little bit. I havent had time to get this checked out but again I will take this into consideration price wise.

The car has the following mods:

Stage 1 RB26 motor from Racepace Motorsport in Melbourne, guaranteed to handle up to 400kw at the wheels. Consists of the following:

Crack tested and prepared block with oil gallery mods

Ported head with new valves, valve guides and oil gallery mods to eliminate oil surge

Forged pistons and rings

Resized rods

Nismo Bearings

New r34 crank

New water pump

New N1 oil pump

All fully balanced and blueprinted

Larger capacity aluminium radiator

Turbos and Exhaust

2x Garrett GT2560's, rated at 350hp each. Turbos are good for around 25psi, currently running 18psi making 297rwkw

Xforce Dump pipes

3" front pipe

3" Exhaust from cat back with 4" muffler.

Hybrid Intercooler

Electronics

Apexi Power FC and hand controller

Greddy Profec B spec II boost controller

Alpine Stereo

Full Nismo instrument cluster - white face gauges

Driveline/Suspension/Brakes

Brass button clutch - zero slippage

TEIN Super Street Coilovers

DBA 4000 Rotors up front with Ferrodo Formula brake pads

Standard GT-R rotors and pads on rear.

I think thats about it, if I think of anything more I will post it up. This car has been my pride and joy and as such it has been well looked after.

I have been the only owner of the car in Australia and have owned the car for around 5 years.

The car has been serviced every 5000k's either by Racepace or a licensed mechanic using Nismo oil filters and Castrol Edge oil. No expense has been spared on maintenance. The new motor has travelled around 25000k's

and I have had no problems with it. The only thing really left to do on this car is put some bigger injectors and fuel pump into it. I have been told that on around 22-24psi it should make 350rwkw.

I am asking for $15000 or best offer. Price is again, negotiable.

Thanks for looking guys.

post-12308-1272926161_thumb.jpg

post-12308-1272926369_thumb.jpg

post-12308-1272926422_thumb.jpg

year model and pics of engine and interior please

It's an 89, I'll post some interior pics up tomorrow when I get home from work

oooo one last thing how many km is on the car you say there 101,000 but on the dash there 114.000 ??????

I think chris was ment to put 114,000 and the engine bay just needs a clean and a polished.

also chris hasnt had time to get the gearbox checked out. its a 3 hour drive to racepace.

for the price this is a bargain

I've been told that the gearbox noise is probably just the fluid needs replacing with a thicker fluid that stays thicker when its hot.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...