Jump to content
SAU Community

Recommended Posts

I'm looking to import a V35 Coupe and was wondering what peoples thoughts are on insurance, and for that matter what options are available. There are, I think, four stages to potentially cover before you can obtain normal car insurance;

  1. From purchase (auction, dealer) to port / loading on ship.
  2. Shipping from Japan to Australia.
  3. Unloading / storing at Aussie port.
  4. Picking up and delivering to Compliance / Home (this step could possibly be covered by normal car insurance? Although the car would not be roadworthy at this point)

Is it possible to insure end to end? Do people normally bother or do most just wear the risk?

What would you do?

Link to comment
https://www.sau.com.au/forums/topic/319448-insurance-shipping-handling/
Share on other sites

If you're importing through a broker, they should be able to help you with the first 2.

For 3 and 4 you may be able to get something like laid up insurance. I know Shannons do it for their custs. Pretty much covers the car while being stored and transported on the back of a truck.

No one will cover you though will its unregistered if its being driven on the road. Not that i could find anyway. I actually drove mine from the compliance place to home to RTA which you can do, just can't remember having insurance for it whilst doing that.

I'm looking to import a V35 Coupe and was wondering what peoples thoughts are on insurance, and for that matter what options are available. There are, I think, four stages to potentially cover before you can obtain normal car insurance;

  1. From purchase (auction, dealer) to port / loading on ship.
  2. Shipping from Japan to Australia.
  3. Unloading / storing at Aussie port.
  4. Picking up and delivering to Compliance / Home (this step could possibly be covered by normal car insurance? Although the car would not be roadworthy at this point)

Is it possible to insure end to end? Do people normally bother or do most just wear the risk?

What would you do?

1, never done it, never needed it and not sure it's actually possible at all. I've never heard of it.

2, I used to do it, now I just use good shipping companies instead and never have a problem. if the car is super duper special I'd spend the extra money on putting it in a container rather than buying some dodgy insurance. prevention is far better than the cure. I'd much rather make sure nothing happens to the car up front (as best I can) than have to bother with insurance claims down the track.

3, same as above. the car is unloaded and will be at the port for a couple of days only. it's secure in there and nothing will happen. not worth it.

4, for this one I would get regular comprehensive insurance. tell the company you've bought a new car and it will be in your possession as of XX date but is not yet registered. it shouldn't be a problem, just give them the chassis number.

end to end I've never heard of anyone who has insured a car from the moment it was purchased at auction right through to it being complied and registered in aus. it certainly doesn't keep me awake at night....

edit: dude! just saw you are buying a V35 coupe. seriously it's not worth it. it's a car that costs a bit over $10K to buy. waste of money insuring that or putting it in a container. seriously even for cars $100K+ carefully monitored, regular roro shipping process is fine.

You probably cant get insurance for the car from the auction to the port, but at each stage, when the car changes hands, the car is checked over, and your customs agent in Japan should be able to trace that sort of stuff if something major happened. Same in Aus as well.

Shipping with Kiwi, all cars are insured but doesnt include inner cargo.

I was personally really worried about the process, but after doing it twice now, I havent really had much to worry about. I have heard of horror stories though. You can expect minor things to be taken, I had my gear knob pinched on my first car. And on my Legacy, someone has replaced the rear view mirror with a different one. Quite funny actually, and I prefer the one they put on :yes:

Guess I won't bother with insurance during transport then, but what if the ship sinks?!

And, when it arrives in Australia I should be able to get it covered by normal car insurance.

To get from the dock to wherever, I believe I can get a temporary permit to drive the car from one location to another (did this with an unlicensed motorbike from local auction recently), is that what most do? I'm guessing I can just drive it home if I need to wait for compliance, then get another permit to drive it to compliance, then home or the pits for licensing. Is there a limit on the number of permits you can get?

hey Insurey McInsurance. what's with you and insurance?

what if the ship sinks? really?

very very remote chance of that happening... there is higher chance of the ship being boarded by pirates and hijacked

if the ship sinks you will most likely loose the car and you will be required to pay a share of the salvage cost. you can insure against that salvage cost liability. it's called general average insurance. personally I think it's a waste of time. if it worries you then look into it. it does occasionally happen. a business partner in japan has had a ship sink that he had some cars on. not nice. but that's the only one I know of personally. of the thousands and thousands of voyages per yer carrying cars I would say less than 1 sink.

If you really want piece of mind, then do it. Its not expensive.

As an example i last used Associated Marine Insurance who are underwriters for Zurich i think. Cost was $230 for $23000 car. Was a 2yr old V35 at the time. If the car is worth less, the premium will come down.

Easy process, get photos of the car before it boards and pay your premium once they give you the quote.

so yeah if no insurance means no sleep, just do it :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...