Jump to content
SAU Community

Looking For A Job

SL33K

By SL33K,
in WA Wasteland

 Share

Recommended Posts

SL33K Experienced

SL33K

Posted
Posted

Hey guyz,

just wondering if any of you know if your work place needs someone to work?

Been looking for a job for a long time and cant find one...

Went for an interview at BP the other day and got an email back sayin i was successfull but there are no vacant positions at the moment and if they have any they will contact me (and they say it might take 2 months)... why call someone for an interview when you already know there arent any positions. Pissed me off.

I managed to get a programming job but the employer needed someone to work full time and i cant work full time coz of visa conditions.

anyways looking for a job in retail... something like in supermarkets, fast food, warehouse.. bleh

Just need some extra cash for extra expenses on car and other stuff as the cash my parents send is not enough for the things i want to do such as car mods lol.... i cant ask them to send me extra coz they will just say "Piss off, you are there to study not to blow money on the car"

anyways any help will be appreciated.

Cheers..

Vish.

Link to comment
https://www.sau.com.au/forums/topic/319759-looking-for-a-job/
Share on other sites
gazza750 Veteran

gazza750

Posted
Posted (edited)

i was thinking Bristile /Austral is all full time and to start they get them from integrated or they used to when i worked at the Malaga plant as an operator.

Try Caltex they always need staff and they use lots of Uni students etc .

Or if you go on Antilag forums in the off topic section they have a jobs board and quite often Carlton United are looking for warehouse staff on there as a member is in charge of job placement etc.

Edited by gazza750
Nic_A31 Grand Master

Nic_A31

Posted
Posted (edited)

Was it you a while ago asking about work at JB Hifi ?

Try someone like them ... back in the day when I worked for them I was offered a job before I was even given the form to fill out for police clearance....none of this 3 month wait + induction + training day shit that the bigger companies like Coles / Woolworths put you through (worked for Woolies as well).

Some shopping centre websites list any vacancies their stores have too, Google the nearest big shopping centre, if they've got a website you might get lucky ?

Edited by Nic_A31
SL33K Experienced

SL33K

Posted
  • Author
Posted

Thanx for info L-Boyd, Gazza and Nic,

Will check out the shopping centres website and Antilag Forum.

Yeah Nic it was me asking bout the JB hifi one... they were looking for full time so i couldnt get it as i told them i needed part time when i went for the interview.

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...