Jump to content
SAU Community

Recommended Posts

Hey guyz,

just wondering if any of you know if your work place needs someone to work?

Been looking for a job for a long time and cant find one...

Went for an interview at BP the other day and got an email back sayin i was successfull but there are no vacant positions at the moment and if they have any they will contact me (and they say it might take 2 months)... why call someone for an interview when you already know there arent any positions. Pissed me off.

I managed to get a programming job but the employer needed someone to work full time and i cant work full time coz of visa conditions.

anyways looking for a job in retail... something like in supermarkets, fast food, warehouse.. bleh

Just need some extra cash for extra expenses on car and other stuff as the cash my parents send is not enough for the things i want to do such as car mods lol.... i cant ask them to send me extra coz they will just say "Piss off, you are there to study not to blow money on the car"

anyways any help will be appreciated.

Cheers..

Vish.

Link to comment
https://www.sau.com.au/forums/topic/319759-looking-for-a-job/
Share on other sites

i was thinking Bristile /Austral is all full time and to start they get them from integrated or they used to when i worked at the Malaga plant as an operator.

Try Caltex they always need staff and they use lots of Uni students etc .

Or if you go on Antilag forums in the off topic section they have a jobs board and quite often Carlton United are looking for warehouse staff on there as a member is in charge of job placement etc.

Edited by gazza750

Was it you a while ago asking about work at JB Hifi ?

Try someone like them ... back in the day when I worked for them I was offered a job before I was even given the form to fill out for police clearance....none of this 3 month wait + induction + training day shit that the bigger companies like Coles / Woolworths put you through (worked for Woolies as well).

Some shopping centre websites list any vacancies their stores have too, Google the nearest big shopping centre, if they've got a website you might get lucky ?

Edited by Nic_A31

Thanx for info L-Boyd, Gazza and Nic,

Will check out the shopping centres website and Antilag Forum.

Yeah Nic it was me asking bout the JB hifi one... they were looking for full time so i couldnt get it as i told them i needed part time when i went for the interview.



  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...