Jump to content
SAU Community

Recommended Posts

just found this thread.

i noticed a bit of pressure drop especially in 1st/2nd, nothing alarming, but thought it odd.

those that have contributed to this thread a while back, how are you guys getting on with filling it to where you have??

on a stone cold engine, where is your oil level on the dipstick?

on a warm engine, say after 10-15mins after shut down, where does it sit?

im on a stock sump, jun pump, tomei baffle and head restrictor, i filled to just above the H.

but going by this thread, seems it may want to be closer to the hump than that.

ill put an extra 0.5ltr in and see what happens, cant harm anything a little extra oil on a pump like the jun.

?

?

  • 1 month later...
  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

?

??

whats to question?

i run a stock sized SUMP, and an uprated JUN oil PUMP

(not sure if you read it as stock pump and jun pump?)

anyone care to let me know how there doing running a bit more oil with your setups?

Edited by jimBNR32

I would say that they would be running more oil because they are smart. If you are running a stock capacity sump with a higher flow oil pump and you go to the track, I think that your pump will drain your sump. Hence, bigger pump = bigger sump

??

whats to question?

i run a stock sized SUMP, and an uprated JUN oil PUMP

(not sure if you read it as stock pump and jun pump?)

anyone care to let me know how there doing running a bit more oil with your setups?

Piggaz was doing track days with an overfilled sump with no problems

he had a Jun baffle though and his N1 pump (that is no longer serviacable might i had :D) has a bit less flow then you

i ran around the streets for 6 months with 400RWKW and a JUN pump on a stock sump with no problems... Filled the sump to 6L

420rwkw+semi slicks+ track use...

it needs to have a baffled sump.. overfilling works to an extent but i properly set up sump with baffles and trap doors is the second best thing after getting a dry sump

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep I guessed as much. You'll find life much easier with a large block something like this -  https://wholesalepaint.com.au/products/dura-block-long-hook-loop-sanding-block-100-eva-rubber-af4437 This is a good demo video of something like this in use -    You have turned your small rock chip holes into large low spots. You'll need to fill and block these low spots.  It's always a little hard not seeing it in person, but yes I would go ahead and lay filler over the whole area. Have a good look at the video I linked, it's a very good example of all the things you're doing. They went to bare metal, they are using guide coat, they are doing a skim coat with the filler and blocking it back. If what you're doing doesn't look like what they are doing, that's a big hint for you  
    • The odometer does go up when driving.  Does this tell it is an issue with the speedometer itself?    Where can I look for replacement cluster? Or speedo? I can likely do the repair.. Will ER34 cluster work on HR34? Or do I need a HR34 20GT S2 specifically lol   
    • Mine's a bit bigger at 70x150mm roughly. The spots are flat, just can feel the edges if I dig my nail into it. I did fix some other other ones by both using my finger to sand that small spot (I'm a bit wary of doing this and creating hot spots and a bigger mess) and I also did sand over it flat and others, but this also worried me a bit because if I create an overall low spot on the panel on paint that is good.  Correct me if I'm wrong but as long as it's flat even if I can feel the edges, I can put filler because it will all be level once I sand it? I can see myself going in a circle after sanding guidecoat with 320 grit if for example the panel is flat with my hand but because I sanded the guidecoat I could have created a low spot again somewhere. Unless where I'm going wrong is what I mentioned previously where I didn't go low enough on the grits. It's 1 step forward and 2 step backwards here haha. I'll probably need to experiment with it more. Last time I go back to bare metal lol.
    • Thanks for the details mate , for me I think being a daily driven and happy with a basic tune (630Nm and 310kw) . Seems to be working well I just put on a set of Michelin Pilot Sport 4 should help put the power down. I'm going to start looking a brakes and LSD in the future so I might reach out to you on options to upgrade the brakes. Cheers - Dee   
    • I have a HR34 GT... RB20DE My speedo doesn't work! The rest of the gauges seem to work, fuel and RPM. I did not notice if my odometer was going up when driving last.  Any ideas? Speed sensor? Hopefully atleast... Gauge cluster perhaps? Or is that unlikely because the other gauges are working?   Any insight is appreciated. This is a rather new to me car. Lol 
×
×
  • Create New...