Jump to content
SAU Community

Recommended Posts

1989 r32 coupe

rb20det

manual

ppg vibrance orange paint bare metal respray was white

apexi lowereds and adjustable damper

F+R nissan skyline strut braces

whiteline swaybars f + R

front facing plenum

blitz bov

walbro fuel pump

xtreme h/d cushion button clutch

splitfire coils

origin streamline body kit

3" turbo back system

17" works evolution stich 17x8 and 17X9

apexi boost gauge

autometer water temp,oil temp and oil pressure 2' gauges

apexi turbo timer

catch can

K&N panel filter

tinted windows

pwr fmi

PWR 40mm radiator

jap aero mirrors

haltech e11v2 with 3 bar map sensor,temp sensor and boost solinoid

gt2871r turbo .6 front housing

gtr injectors

dba slotted rotors all round

bendix unltimate pads

braided brake lines

braided clutch line

stereo:

pioneer indash dvd player 6.5" screen

fusion front splits 6.5"

kicker rear components 6.5"

response 4x100wrms amp

12" pioneer sub

currently runs 224.1 on 17psi

asking 18,000 as is with vic reg till jan 11

i am intersted in a swap for either r33 or 34 4 door as family is coming and need bigger car thats it

i will be sad to part with this but these things happen at some point i have owed it for 5 years now and no major dramas the only bad point is front bar needs some attention but whos doesnt really lol and i have spent more than i care to remeber to build this up lol

i wont be letting people drive this just for the hell of it so i'm not prepared to drive any where for no reason

Daniel 0400562482

horsham vic

post-20540-1273389390_thumb.jpg

post-20540-1273389416.jpg

Edited by willsy
Link to comment
https://www.sau.com.au/forums/topic/319902-r32-coupe/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

is no body interested in this at all very nice car can put up more pics of the pearl paint but is hard to take photos looks awersome in the sun light and under fluro lights really want to buy a turbo 4 door or swap for one most people are very impressed when they see this for the first time and have won awards for the paint

Link to comment
https://www.sau.com.au/forums/topic/319902-r32-coupe/#findComment-5288978
Share on other sites

Not trying to throw in cold water, but maybe try working down the price more. Can tell that much wrench work has been put into the ride, but if the price is going to be way way above the market value, no one's going to turn their heads back to look at it the 2nd time.

is no body interested in this at all very nice car can put up more pics of the pearl paint but is hard to take photos looks awersome in the sun light and under fluro lights really want to buy a turbo 4 door or swap for one most people are very impressed when they see this for the first time and have won awards for the paint
Link to comment
https://www.sau.com.au/forums/topic/319902-r32-coupe/#findComment-5289265
Share on other sites

Good luck with the sale mate, it's a tidy looking car.

I know how hard it is these days to get rid of a '32 regardless of how much work has been done to it/how clean it is. If you find that you need to drop the price way below what you'd honestly be satisfied with, do what I did and try to find someone you know will look after it as well as you did (i.e. a close mate). At least that'll offer some consolation for you knowing that all your hard work hasn't been undone. The financial loss doesn't seem that bad that way (y)

Just my 2c ;)

Free bump.

Link to comment
https://www.sau.com.au/forums/topic/319902-r32-coupe/#findComment-5289269
Share on other sites

thanx guys but not just going to give this away and looks can be deceiving in that respect becasue i have done more to this than i care to remeber and have spent many nites and weekends working on this car not that any body really cares about that really and if i were to consider offers they would have to be resonable becasue cars dont simply build them selves when u consider its had a bare metal sepray, suspension bits, new rear bearings engine mods done it try biulding the same thing for under 20k becasue it wont happen

maybe if someone was interested give me a ring and see wat happens

0400562482

daniel

and b4 u all ask no the plates arent coming with the car when i sell it

post-20540-1276323963_thumb.jpg

Edited by willsy
Link to comment
https://www.sau.com.au/forums/topic/319902-r32-coupe/#findComment-5289276
Share on other sites

  • 2 weeks later...

so would love to move onto somehting abit bigger in the next little while cefiro's arent out of the question or even a laural so if someone wants to step into a 32 mines setup really for nearly wat ever u might be thinking of doing with it

Link to comment
https://www.sau.com.au/forums/topic/319902-r32-coupe/#findComment-5312501
Share on other sites

sweet looking car man can see ya spent ya money on it:) but at the end of the day its a 1989 r32, ya dont get ya money back for what ya spend i didnt when i sold my 32 and that built from ground up:) i only got 14 grand for it in the end which was above what they go for:) so i was lucky. good luck with sale man:)

Link to comment
https://www.sau.com.au/forums/topic/319902-r32-coupe/#findComment-5317423
Share on other sites

sweet looking car man can see ya spent ya money on it:) but at the end of the day its a 1989 r32, ya dont get ya money back for what ya spend i didnt when i sold my 32 and that built from ground up:) i only got 14 grand for it in the end which was above what they go for:) so i was lucky. good luck with sale man:)

well i'm not going to give something away for no money i would rather strip all the bits i've put on it and keep them and sell it that way and if somebody is interested as low as i will go is $15500 thats it no lower

Link to comment
https://www.sau.com.au/forums/topic/319902-r32-coupe/#findComment-5319219
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...