Jump to content
SAU Community

Wastegate Questions...

r32gtrv-spec
 Share

Recommended Posts

r32gtrv-spec Collaborator

r32gtrv-spec

Posted
Posted

ok, so my set of n1 gtr turbos on my r32 gtr.

now my questions is.. twin turbos run twin wastegates correct?? so am i able to upgrade the wastegates ? as they are parts of the turbo on the twin n1's ??

im kinda confused.. i thought the wastegate was a seperate peice all togeather ?

cheers

Link to comment
https://www.sau.com.au/forums/topic/320237-wastegate-questions/
Share on other sites
Deano45 Rising Star

Deano45

Posted
Posted
ok, so my set of n1 gtr turbos on my r32 gtr.

now my questions is.. twin turbos run twin wastegates correct?? so am i able to upgrade the wastegates ? as they are parts of the turbo on the twin n1's ??

im kinda confused.. i thought the wastegate was a seperate peice all togeather ?

cheers

Wastegates are internal on the turbos hence there are 2. You can upgrade the actuators. These control the wastegates.

They are removable and can be replaced with adjustable ones. Garrett and HKS ones both fit. There are probably other ones you can get, that will fit.

GTRsean Grand Master

GTRsean

Posted
Posted
Wastegates are internal on the turbos hence there are 2. You can upgrade the actuators. These control the wastegates.

They are removable and can be replaced with adjustable ones. Garrett and HKS ones both fit. There are probably other ones you can get, that will fit.

+1

JonnoHR31 Grand Master

JonnoHR31

Posted
Posted

standard and n1 turbos are internal or integral wastegate, which means the wastegate is integrated into the exhaust housing of the turbo, so when you upgrade the turbos the wastegate on them will already be the right size to suit the turbo.

external wastegate turbos have no gate in the turbo itself and use a seperate or external (hence the name) wastegate mounted somewhere on the manifold

paulr33 Grand Master

paulr33

Posted
Posted

when you say wastegate please clarify what you mean

do you mean the spring actuator rod (most people refer to this) - this controls the minimum amount of boost you run before the wastegate opens

or

do you mean the wastegate size itself - this bypasses pressure off the housing and maintains effective boost control

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Well yes i realise that Jono :P - but WHY does he want to upgrade them as i said.

Being able to or not doesn't tell anyone much at all.

Perhaps there is something the OP has been told by a mates mate that he needs to do to fix some issue/enhance performance or anything else weird and wonderful that can occur after a few beers down @ the pub :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...