Jump to content
SAU Community

Recommended Posts

Reposting from the 300ZX forum:

QLD Licence changes

copypasta for those too lazy to click

A NEW licensing regime has cemented Queensland's position as one of the most costly places in the country to own a car.

Following massive increases in registration, the demise of the fuel subsidy and the looming impost of higher tolls, the Bligh Government on Wednesday unveiled big increases in licensing costs.

The spike will fund the introduction of the long-promised digital driver's licence, which has blown out from a potentially cost-neutral exercise to a $110 million system.

A five-year licence will jump in cost from the current $73.30 to $96.05 next year, and rise to $152.50 by 2014-15, putting Queensland in line with the highest-charging states.

The cost of other licence and authority cards will also skyrocket, including learner's permits, boat licences and the adult proof of age card, which will replace the 18+ card.

The new regime will add to registration rises of up to 22 per cent last year, a statewide 9.2 per cent increase in fuel prices after the subsidy was scrapped and big toll hikes from July 1.

While the Bligh Government defended the new cards and their ability to tackle fraud, the Opposition blasted the price hike.

State Transport Minister Rachel Nolan yesterday insisted the introduction of the new secure licence system was essential to fight fraud. "I don't think that anyone really believes that the old laminated licence is really an appropriate primary form of ID in 2010 and into the future," she said.

RACQ external affairs manager Gary Fites said the additional costs needed explaining but drivers would welcome the additional security.

"People are very security conscious and will see the benefit of that," Mr Fites said.

However, Opposition transport spokeswoman Fiona Simpson said motorists were again being forced to be the Bligh Government's cash cow.

"It is time for Anna Bligh and Labor to get their sticky fingers out of motorists' pockets," Ms Simpson said.

The new licence delivers on promised security improvements with biometric imaging replacing polaroid photos as well as holograms and watermarks to make duplicating the cards much more difficult.

However, the hi-tech convenience mooted to come with the card – such as paying for parking tickets – has failed to materialise with its computer chip little more than an idle accessory. Address details will still be printed on the card.

Ms Nolan conceded the card's computer chip was currently under used but available for future purposes. "We have future-proofed the card and provided a technological capacity," she said.

Police will be able to access the digital images of drivers for traffic offences and emergencies but must apply to a justice of the peace if the photo is required for other purposes.

Edited by Isola
Link to comment
https://www.sau.com.au/forums/topic/320495-qld-licences-to-go-all-james-bond/
Share on other sites

I understand intelligent I.D to tackle fraud, you use your drivers licence to open bank accounts. I don't get the major hike in price here...

GoCards are programmable/have data on them and cost like $5 or something. What's the extra ~$50 all about?

I understand intelligent I.D to tackle fraud, you use your drivers licence to open bank accounts. I don't get the major hike in price here...

GoCards are programmable/have data on them and cost like $5 or something. What's the extra ~$50 all about?

Cap'n bligh trying to recover all the funds she squandered.

I got my rego renewal notice yesterday and it had an add for Hyundai packaged with it. I wonder how much income that's bringing her?

Protest letter written and emailled.

http://www.thepremier.qld.gov.au/tools/contactform.aspx

I advise everyone to send their angry comments (dont swear) to this form, let anna know how hated she is.

It will only take someone to start revolution i think, someone to start a major show of unhappiness in the government right now, just to get the ball rolling, and they would be running scared.

They would never dream of governing in france like they do here, why are we so apathetic!??? they get away with this here coz we LET THEM.

whos going to lead a revolution and shut these idiots down?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...