Jump to content
SAU Community

GTR Fuel pump compatability

ryobi

By ryobi,
in General Maintenance

 Share

Recommended Posts

GTRgeoff Grand Master

GTRgeoff

Posted
Posted

I fitted a gtr pump yesterday, although I suspect it's from an R32 and other than minor differences on the base it was a good fit. Still used a hose clamp to ensure it wouldn't move though.

The big black retainer on the top of the tank screws off with a rh thread and then you have to pull out the pump which slots into a bracket on the front wall of the fuel tank. Swap the fittings such as fuel filter/pickup over and install in the same position, just remember where the filter faces as it goes well forward into the bottom of the tank.

Watch the boot access hole tho as it can be sharp and I got a few minor cuts, particularly when I was unscrewing the retainer

  • 6 months later...
R32Big_boy Veteran

R32Big_boy

Posted
Posted

Yeah, they all pritty much fit into the 32 cradel. You just need to chop up the rubber down the bottom so that it fits in snug. I've got a denso fuel pump in my car, its a very good upgrade to make and easy to! A Vl and VL turbo pump I BELIEVE are the same. WEnt into a shop that sells parts and they looked at the part numbers and found they were the same. However you can get good aftermarket ones for around 200 if you look.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • joshuaho96
      UniClutch

      By joshuaho96 · Posted

      All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Piggaz
      UniClutch

      By Piggaz · Posted

      Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...