Jump to content
SAU Community

S2 Parts, A Few S1 Parts, Rear Flares And S15 Bits

Tangents
 Share

Recommended Posts

Tangents Rising Star

Tangents

Posted
Posted

Parts left over after the conversion, need the space back. Panels are black, from an S2. Will consider offers for the lot aswell with a $100 packing fee if it goes interstate.

Bonnet and hinges $165

Bonnet dampers $60

Guards L & R $110 (Passenger guard has a ding near the headlight)

The long metal parts the guards bolt to in the engine bay L & R $30

High beam L & R $75 each

Grille with badges $60

Front bar $40 (Has a small crack near the passengers headlight can be welded, and the usual small scratch's)

Reo $50

Indicators and foglights (front bar) L & R $25 each (Plugs have been removed but can still be wired up)

Bonnet catch and support $60

Stock airbox with panel filter and snorkel $80

Stockintake pipe with stock oil and BOV return pipes $40

Stock side mount with return piping $50

LHS passenger door COMPLETE, $90 (door skin is toast though)

Stock BOV $20

From an S1

Power steering reservoir $10 (can be used in pretty much any skyline though I think)

Auto trans cooler $15 (average cond)

Washer bottle with motors $20

Condensor $15

Stock horns $10

S1 nose cut wiring loom with Bosh 35w HID ballasts with separate fuse box $30

Also have the rear flares that came with my conversion gear seen in the first post here for $80

Alpine head unit with manual and remote (worked when I pulled it out) model number CDA-9811 $25

S15, came off at 60,000km's

Stock camber, traction and toe arms $40

Stock side mount with most if not all piping $50

Stock DIN pocket, hole cut in back for EBC wiring $20

Stock A pillar Garnish (no gauge cup) $30

Pretty sure thats about it, all prices are not including postage, Please TXT 0409077592, email [email protected] or PM me. I'll put pics up if anyone is interested.

Cheers,

Teren

pintaline Proficient

pintaline

Posted
Posted

damn!!!

iv been after a set of rear flares for 3 years now! i have front ones in the shed. DAMN!!!

oh well, the hunt continues........

D.

Tangents Rising Star

Tangents

Posted
  • Author
Posted (edited)

Bonnet and hinges $165

Bonnet dampers $60

Guards L & R $110 (Passenger guard has a ding near the headlight)

The long metal parts the guards bolt to in the engine bay L & R $30

High beam L & R $75 each

Grille with badges $60

Front bar $40 (Has a small crack near the passengers headlight can be welded, and the usual small scratch's)

Reo $50

Bonnet catch and support $60

Stockintake pipe with stock oil and BOV return pipes $40

Stock side mount with return piping $50

LHS passenger door COMPLETE, $90 (door skin is toast though)

$680 for the lot!!! (excluding postage and packing fee if going interstate) :ninja:

Power steering reservoir $10 (can be used in pretty much any skyline though I think)

Auto trans cooler $15 (average cond)

Washer bottle with motors $20

Condensor $15

Stock horns $10

$50 for the lot!!! (excluding postage) :(

S15, came off at 60,000km's

Stock camber, traction and toe arms $40

Stock side mount with most if not all piping $50

Stock DIN pocket, hole cut in back for EBC wiring $20

Stock A pillar Garnish (no gauge cup) $30

$100 for the lot!!! (excluding postage) :)

Edited by Tangents
-RBD2- Mentor

-RBD2-

Posted
Posted

will sms you in the morning teren to organise payment for the flairs!

:ninja::P:D:(:)

sorry dave,i tried to buy these flairs first time they came up

couldnt interest you in selling your front pair could i?

pm me if you want dave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • iamhe77
      Might import a stagea

      By iamhe77 · Posted

      Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • iamhe77
      Stagea identification?

      By iamhe77 · Posted

      Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • GTSBoy
      My BMW E39 528i touring

      By GTSBoy · Posted

      Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...