Jump to content
SAU Community

Recommended Posts

i purchased these rims for a project i had... now lost my interest in it

MERCEDES BENZ W203 19" AMG (very rare + expensive)

they are in mint/exceptional... not even a touch of a scratch on em...

they are...

2x 19x8.5 (front)

2x 19x9.5 (rear)

rims include 4x center caps+ 4x chrome valves +20x studs

the wheels have never been fitted with a tyre

th_IMG_0077.jpg th_IMG_0075.jpg

$1500 neg. (excellent price, chasing quick sale)

p/up preferred from south eastern suburbs, can post if buyer organizes + pays for it

can send more photos by email/mms

0433087733

(only selling to fund my engine rebuild)

will accept trades/swaps for sr20 parts

Link to comment
https://www.sau.com.au/forums/topic/321360-fs-vic-merc-amg-19-rims/
Share on other sites

  • 2 weeks later...
Curious, how are they redrilled, and still fit the merc?

not sure exectly, idd expect the holes to be mearly drilled out a bit more as 112 and 114 is not that much different, also considering mercs use bolts and other cars use nuts

Do these come out on any particular merc?

not 100% sure its off a 2003 2005 merc of some kind... unsure of which exactly as the rim was only ever issued as a factory "option"

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...