Jump to content
SAU Community

Recommended Posts

when is your shipment coming in for the gtr wing and do you have a white one

Should be here mid April.

Not sure if I have a white one, but that is easy to change...

I have a mate who makes perfect FBG copies if that helps, give me a call.

Thanks

Adam

0412631081

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Any chance of getting my drivers seat clips, the ones that hold the map pocket on to the back of the drivers seat, four [i'll take more for next time if possible] of them, in a '98 SII gts2.5t. Or a complete map pocket if thats how it comes.

Houdy,

Can organise as many GTR wings as needed. Looking at about 500 for a primed one plus postage / freight to anywhere. These wings are excellent will not disappoint.

get in touch with Adam (supahiro27) or myself,

Haro

[email protected]

[email protected]

Hi Sven Laptop

PM sent to you.

***************

Hi ASH (couldn't find the squiggly thing for your S :( )

Yes we can do the nismo wing for the 33s no worries. As for the blade alternatives.....sure can mate, we have already done a carbon one (looks sexy) , twin blade alloy shouldn't be a problem. The 500 for the GTR wing is an approximate price at the moment and does NOT include any freight or postage.

Feel free to send me an email with any other questions.

Cheers for the interest.

Haro

[email protected]

[email protected]

I am looking for a r33 speedometer or complete instrument unit if you can help

Hi SXE33,

Sorry for the delayed reply, YES we do have a complete instrument unit found it this arvo!! :stupid:

It is from an R33 GTS-t i cant remember what kms it is up to, it is in good condition.

Im not too sure on the "going rate" for these things so please PM me with a decent offer and we will see how we go. (I can probably bring it to the Servo some time this weekend so if your in the area you can have a look, get back to me on that.)

Haro

[email protected]

[email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...