Jump to content
SAU Community

Recommended Posts

Just practice, practice, practice! Read a few sites and go experiment a bit. That's what I did, as well as asking advice from the guys on here.

Also, if you can do a course on it, you'll learn heaps. My parents bought me one for my birthday this year, best present ever!! Lol

Hopefully i learn how to use my camera properly by next year
Just practice, practice, practice! Read a few sites and go experiment a bit. That's what I did, as well as asking advice from the guys on here.

Also, if you can do a course on it, you'll learn heaps. My parents bought me one for my birthday this year, best present ever!! Lol

Agreed, take heaps of photos using different settings and just experiment to see what works. Even something as simple as putting your camera on a tripod, not moving it, and just playing with random settings on the camera can teach you a whole lot!

Oh, and forget the "Auto" mode - read some books/magazines/websites and watch some videos on YouTube or Canon's own "World of EOS" site. There's no use having a D-SLR if you're only going to use the Auto mode.

Don't get a cheap one. The expensive ones are expensive for a reason. Better support, less vibration, stronger and more expandable e.g. the legs can go everywhere and so can the neck of the tripod.

For a beginners tripod, a SLIK or manfrotto tripod would do a good job for relatively cheap (between $100-$200 with the normal panhead). I suggest buying a ballhead like a Manfrotto 488RC2 for ease of manouevrability when panning etc it is less restrictive than a panhead.

Unless you plan on supporting 400 2.8's and big super tele lenses, there is no need for you to invest in expensive tripods like Gitzo's unless you become professional, need them essentially for landscape photos or super strong support for heavy stuff or unless you have the money to blow on them :)

Hope i helped.

Hopefully i learn how to use my camera properly by next year

THey are fine, because you're using Auto (I was too lol) you will be capturing "non-moving" images. Enthusiasts call that happy-snaps.

You need 3 things to make your photos more creative:

1. Switch your camera mode to P or M

2. Get fast zoom lenses with a good range (etc 70-200mm or higher)

3. Imaging software (Adobe etc)

3. Practice the above 3

With an 11-16mm, food and a portable chair for one old man :) in both hands, I did not have the setup to take many shots let alone panning ones.

As for cheap DSLRs, they are fine as long as you have access to manual mode. Sometimes it is better to work your way up once you figure out the type of photographer that you are and the lenses that you have. Don't be put off if someone has a more expensive body or lenses than you, it's the person behind the camera that counts.

I can +1 for the slik tripod.

Yes it's cheap and shitty, but I haven't really found a situation where it hasn't done a good enough job for me. It's nice and light too.

I'd only upgrade if I was going to do more panning, or if i was going on a proper adventure as it's not the most robust unit out there.

still.. good for entry level.

THey are fine, because you're using Auto (I was too lol) you will be capturing "non-moving" images. Enthusiasts call that happy-snaps.

You need 3 things to make your photos more creative:

1. Switch your camera mode to P or M

2. Get fast zoom lenses with a good range (etc 70-200mm or higher)

3. Imaging software (Adobe etc)

3. Practice the above 3

With an 11-16mm, food and a portable chair for one old man ;) in both hands, I did not have the setup to take many shots let alone panning ones.

As for cheap DSLRs, they are fine as long as you have access to manual mode. Sometimes it is better to work your way up once you figure out the type of photographer that you are and the lenses that you have. Don't be put off if someone has a more expensive body or lenses than you, it's the person behind the camera that counts.

Good advice! Although..

I wouldn't suggest going from Auto to M purely for the fact you won't be able to troubleshoot why your photos are so over-exposed/blurry/under-exposed etc etc...

For motorsports or any type of photography where you are panning and you are just starting out, i recommend using TV (a.k.a Shutter speed priority) mode. This will allow you to change the shutter speed to a speed you can comfortably pan with but still show motion (anywhere from 1/160th & slower). The camera will control the aperture for you, therefore all you have to focus on is shutter speed and controlling your ISO.

Of course, the faster/closer you are to a car that is moving fast, you can bring your shutter speeds up and still get enough motion blur because of the speed you are panning.

Try out your cameras FPS burst as well. When using burst mode, try not to max the buffer out, but a simple burst of 3-5 shots.

I suggest not using the "Auto" focusing modes either. Choose a single point (the middle being the most accurate) and focus on composition and getting spot on focus this way. Also, do not use single shot for the AF. Change this to AI Servo (for canon) i can't remember what it is for Nikon but i think its continuous servo.

Practicing with a kit lens e.g. 55-200, 75-300 etc.. is great before spending big bucks on lenses and wondering why they aren't miraculously making spectacular images. It's all about practice and your technique. Also when using super tele's e.g. 400mm+ atmospheric haze also comes into consideration to do with sharpness e.g. heat waves in the roads. It's also much HARDER to keep the lens steady, which is why if your using lenses this long, i suggest getting a monopod until you've had practice with panning.

The main technique with panning is to have your feet pointing towards where you want to take a shot and twist your body so you can follow/track the car until it reaches your point where you want to take photo. I have found this produces more consistent results for myself and tonnes of other people, but each to there own.

Remember not to get frustrated also! Panning is super frustrating! Practice practice practice and results will come over time.

Good luck and post up some more photos!

Edited by FST513
Good advice! Although..

I wouldn't suggest going from Auto to M purely for the fact you won't be able to troubleshoot why your photos are so over-exposed/blurry/under-exposed etc etc...

For motorsports or any type of photography where you are panning and you are just starting out, i recommend using TV (a.k.a Shutter speed priority) mode. This will allow you to change the shutter speed to a speed you can comfortably pan with but still show motion (anywhere from 1/160th & slower). The camera will control the aperture for you, therefore all you have to focus on is shutter speed and controlling your ISO.

Of course, the faster/closer you are to a car that is moving fast, you can bring your shutter speeds up and still get enough motion blur because of the speed you are panning.

Try out your cameras FPS burst as well. When using burst mode, try not to max the buffer out, but a simple burst of 3-5 shots.

I suggest not using the "Auto" focusing modes either. Choose a single point (the middle being the most accurate) and focus on composition and getting spot on focus this way. Also, do not use single shot for the AF. Change this to AI Servo (for canon) i can't remember what it is for Nikon but i think its continuous servo.

Practicing with a kit lens e.g. 55-200, 75-300 etc.. is great before spending big bucks on lenses and wondering why they aren't miraculously making spectacular images. It's all about practice and your technique. Also when using super tele's e.g. 400mm+ atmospheric haze also comes into consideration to do with sharpness e.g. heat waves in the roads. It's also much HARDER to keep the lens steady, which is why if your using lenses this long, i suggest getting a monopod until you've had practice with panning.

The main technique with panning is to have your feet pointing towards where you want to take a shot and twist your body so you can follow/track the car until it reaches your point where you want to take photo. I have found this produces more consistent results for myself and tonnes of other people, but each to there own.

Remember not to get frustrated also! Panning is super frustrating! Practice practice practice and results will come over time.

Good luck and post up some more photos!

Listen to this man :banana:

Good advice! Although..

I wouldn't suggest going from Auto to M purely for the fact you won't be able to troubleshoot why your photos are so over-exposed/blurry/under-exposed etc etc...

For motorsports or any type of photography where you are panning and you are just starting out, i recommend using TV (a.k.a Shutter speed priority) mode. This will allow you to change the shutter speed to a speed you can comfortably pan with but still show motion (anywhere from 1/160th & slower). The camera will control the aperture for you, therefore all you have to focus on is shutter speed and controlling your ISO.

Of course, the faster/closer you are to a car that is moving fast, you can bring your shutter speeds up and still get enough motion blur because of the speed you are panning.

Try out your cameras FPS burst as well. When using burst mode, try not to max the buffer out, but a simple burst of 3-5 shots.

I suggest not using the "Auto" focusing modes either. Choose a single point (the middle being the most accurate) and focus on composition and getting spot on focus this way. Also, do not use single shot for the AF. Change this to AI Servo (for canon) i can't remember what it is for Nikon but i think its continuous servo.

Practicing with a kit lens e.g. 55-200, 75-300 etc.. is great before spending big bucks on lenses and wondering why they aren't miraculously making spectacular images. It's all about practice and your technique. Also when using super tele's e.g. 400mm+ atmospheric haze also comes into consideration to do with sharpness e.g. heat waves in the roads. It's also much HARDER to keep the lens steady, which is why if your using lenses this long, i suggest getting a monopod until you've had practice with panning.

The main technique with panning is to have your feet pointing towards where you want to take a shot and twist your body so you can follow/track the car until it reaches your point where you want to take photo. I have found this produces more consistent results for myself and tonnes of other people, but each to there own.

Remember not to get frustrated also! Panning is super frustrating! Practice practice practice and results will come over time.

Good luck and post up some more photos!

Good advice, admittedly I haven't used the other settings as much as auto and manual. I find myself using manual 65% of the time and auto for the rest. I think using manual forces you to understand your camera better and through practice and habits you already know what kind of settings you need to shoot the subject whether its in motion or not or in low light or high.

As for panning, I myself haven't done this but logic tells me that getting a monopod (or tripod) would produce a smoother rotation of the camera especially if it is front-heavy.

I haven't got a tripod but will be getting one soon, got any recommendations for under $200? I carry light so prefer something that's not too heavy.

Good advice, admittedly I haven't used the other settings as much as auto and manual. I find myself using manual 65% of the time and auto for the rest. I think using manual forces you to understand your camera better and through practice and habits you already know what kind of settings you need to shoot the subject whether its in motion or not or in low light or high.

As for panning, I myself haven't done this but logic tells me that getting a monopod (or tripod) would produce a smoother rotation of the camera especially if it is front-heavy.

I haven't got a tripod but will be getting one soon, got any recommendations for under $200? I carry light so prefer something that's not too heavy.

Don't get me wrong, i use Manual 24/7. It's a habit that i have got into. My dial will never move off Manual unless the light is ALWAYS constantly changing e.g. clouds/sun/clouds/sun even then i will already have exposures for both sorted out, but if i have to, i will use different modes for different situations. As long as you get the shot, that's all that matters :bunny:

When your starting out, manual can be very confusing though. As i said in my previous post, trouble shooting will be too hard if you don't understand what histograms read or why its under/over exposed/no DoF/too much DoF etc etc... I was just simply advising, if you want to start panning, use TV to get used to the settings the camera sets and then when you feel comfortable switch it to Manual for more control. It's always good to expose to the right as well :D

Depends on what lens you are using... E.g. Panning with a 400 2.8 or bigger, is not really logical to not use a monopod. I mean, you might get some good shots but damn your arms are going to be sore! I don't use a tripod/monopod unless i'm using a 300 2.8+ simple for the fact of not getting sore arms at the end of the day.

As mentioned above, you can pick up a SLIK tripod which isn't heavy (for a good tripod) and it does everything you need with unlockable legs for wider spread (<-- that sounds really dirty haha) and adjustable centre column you can raise up and down. Otherwise i think the Manfrotto 055XBPRO its called or something like that, is around $200-$250. Before buying one, go to your local camera store and check them out for weight, ease of use and adjustability.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...