Jump to content
SAU Community

Fuel System Question

Mark-32

By Mark-32,
in Engines & Forced Induction

 Share

Recommended Posts

Mark-32 Community Regular

Mark-32

Posted
Posted

Just got a quick question regarding in-tank pumps and external pumps.

Im in the process of fitting a decent fuel system into my gtst.

I currently have a single 044 in tank pump but iam going to fit a surge tank and 2x external 044's to feed my RB26.

Just wondering if my current 044 in tank pump will be ok to leave there to use as the lift pump for the surge tank?

I realise that its probably overkill as a lift pump but it would seem like the simple option to just leave it in there and buy another 2 044's to mount externaly. And surely it would'n be working hard at all as a lift pump?

Any advise is much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/321806-fuel-system-question/
Share on other sites
Mark-32 Community Regular

Mark-32

Posted
  • Author
Posted

Yeah but Iam aiming for 400rwkw plus. I currently have 320kw but will soon be winding the boost up from 14psi to 20ish. My tuner recommended the two external 044's and said one would do but get a second for peice of mind in case one fails.

Also can anyone tell me if the standard fuel lines from the tank to the rail will suffice?

rob82 Mentor

rob82

Posted
Posted
Yeah but Iam aiming for 400rwkw plus. I currently have 320kw but will soon be winding the boost up from 14psi to 20ish. My tuner recommended the two external 044's and said one would do but get a second for peice of mind in case one fails.

Also can anyone tell me if the standard fuel lines from the tank to the rail will suffice?

The std line will choke up 2 044's but it will flow enough for that horsepower level. I would definately switch the second pump on at high boost/rpm. Dont forget to put a one way valve in front each pump - even if you dont switch the second pump.

Dr DRFT Contributor

Dr DRFT

Posted
Posted
The std line will choke up 2 044's but it will flow enough for that horsepower level. I would definately switch the second pump on at high boost/rpm. Dont forget to put a one way valve in front each pump - even if you dont switch the second pump.

He is right the line will choke up and must get the one way valves.

But for the amount of power your after two 044 is over kill. Even if your tuner says its for saftey, that really aint gonna work cause if both are turned on than it will be tuned for both so if one stops working it will suffer from starvation anyway. Plus with one it will be neater and cheaper. I also bought two cause thought that is what was needed but I had 576kw@wheels and only ever had one turned on and found that they actually flowed alot better as a single. Whereas with two you also have resistance problems....Best to fit one and get it tuned and if for some reason it is not evough than fit a second(which I doubt youll need).

Dr DRFT

Mark-32 Community Regular

Mark-32

Posted
  • Author
Posted
if you havent bought the pumps already use the one you have intank as the external and buy a proper lift pump. be cheaper and work much better

Thanks dude.

Ok so it sounds like this is going to be the best bet for my needs.

Can anyone give me an idea of what sort of lift pump I should use and the rough difference in price compared to the 044.?

I ask this question because if there is not a major difference in price I will just leave the current intank pump where it is to save the stuffing around of removing it and so on.

Thanks for averyones help, Much appreciated.

"Dr Drift" that info is exactly what i was after as the setup would be alot cheaper and neater with the single external setup. If your having no dramas with 570+kw im sure mine will be fine also.

Also can anyone shed some light as to what size surge tank I should be looking at, and is there any specific sized rubber fuel line and fittings I should be using to plumb the external pump to the surge tank and return etc?

N1GTR Grand Master

N1GTR

Posted
Posted

Fuel setups has all been covered in detail before. Have a search through the forums, the motorsport section had a good thread last year.

I had an 044 intank and that was fine, then upped power and put a surge tank in. For me at least it wasn't worth swapping the 044 already intank for an 040, 023 or a stock pump. Hope that helps!

Mark-32 Community Regular

Mark-32

Posted
  • Author
Posted
Fuel setups has all been covered in detail before. Have a search through the forums, the motorsport section had a good thread last year.

I had an 044 intank and that was fine, then upped power and put a surge tank in. For me at least it wasn't worth swapping the 044 already intank for an 040, 023 or a stock pump. Hope that helps!

Yeah cheers mate. So when you fitted the surge tank you just got another 044 as external?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...