Jump to content
SAU Community

Recommended Posts

This beautifull R34GT-t is being offered at probably less than you could bring one in and comply it for.

If you are looking for a car that has never been modded out and is in in beatifull all round condition then this is probably the one you're looking for--

206KWS ATF from the factory .

--and while it is fine to get a ride with mods aready done how many of them are actualy fully serviced ?

--and I dont mean just the oil changed every 5 minutes.

This car is in sterling condition and has been fully serviced up to and including it's 100000k monster one everything which has to be replaced and or serviced has been including things like the water pump which aren't even service items.

The complete serviceing on this car has cost over $2500.00. with receipts to show for all parts used not just a service sheet from one garage where they may or may not have actualy done the work.

It also has all its Japanese log books from new and as far as I can tell the 84K klms is genuine.

It has the following minimal mods .

*Kingsprings stock ratio (according to Kings) 22mm lower than stock with all new OE struts.

*Turbo back custom exhaust- 3" dump 3" high flow cat 3.5" follower and mid muffler and 3'5" in 3'5" out Varex muffler, hard wired, isolator switched.

*Wheels -Enkei RPO3 17 x 8 (8.1 kg) --Nexen 225 x 45 x 17 rubber 80% tread or stock OE 17 x 7.5 --same rubber.

*ICE is a japspec Pioneer Carriozera DD head unit with CD, cassette and minidisc , it works amazingly well , this has been adapter plug installed so the OE wiring is mint and I'm guessing that any new pioneer will likeley be plug and play with this adapter.

* Drift airfilter.

Everything on this car works as it should to factory specification ---and-- no rattles bumps or grinds , it does 11 ltrs to 100 klms city only running .

The paint and interior are in remarkably good condition.

I'll be looking for $15990.00 with the OE wheels which look very good IMO or $169900.00 with the ENKEI wheels .(The Nexen tyres will be on either.)

If you're interested in making an offer iether post or PM me , I am also interested in a trade for an BMW 318iS Auto (with some cash my way on this one) .

Please lowball if you feel like it I'll have some fun replying. :)

Here are some pics.

skylinef.th.jpg

skylined.th.jpg

skylinea.th.jpg

skylinecy.th.jpg

And one from when I bought the car to show the stock wheels.

skyline1n.th.jpg

Edited by BASHO
Link to comment
https://www.sau.com.au/forums/topic/321848-fs-98-r34-gt-t-manual-skyline/
Share on other sites

Hi Do you still have the car, if so please PM, I tried to PM you but being new to the Forum I was unable,see my post.I live at Burleigh

Cheers

This beautifull R34GT-t is being offered at probably less than you could bring one in and comply it for.

If you are looking for a car that has never been modded out and is in in beatifull all round condition then this is probably the one you're looking for--

206KWS ATF from the factory .

--and while it is fine to get a ride with mods aready done how many of them are actualy fully serviced ?

--and I dont mean just the oil changed every 5 minutes.

This car is in sterling condition and has been fully serviced up to and including it's 100000k monster one everything which has to be replaced and or serviced has been including things like the water pump which aren't even service items.

The complete serviceing on this car has cost over $2500.00. with receipts to show for all parts used not just a service sheet from one garage where they may or may not have actualy done the work.

It also has all its Japanese log books from new and as far as I can tell the 84K klms is genuine.

It has the following minimal mods .

*Kingsprings stock ratio (according to Kings) 22mm lower than stock with all new OE struts.

*Turbo back custom exhaust- 3" dump 3" high flow cat 3.5" follower and mid muffler and 3'5" in 3'5" out Varex muffler, hard wired, isolator switched.

*Wheels -Enkei RPO3 17 x 8 (8.1 kg) --Nexen 225 x 45 x 17 rubber 80% tread or stock OE 17 x 7.5 --same rubber.

*ICE is a japspec Pioneer Carriozera DD head unit with CD, cassette and minidisc , it works amazingly well , this has been adapter plug installed so the OE wiring is mint and I'm guessing that any new pioneer will likeley be plug and play with this adapter.

* Drift airfilter.

Everything on this car works as it should to factory specification ---and-- no rattles bumps or grinds , it does 11 ltrs to 100 klms city only running .

The paint and interior are in remarkably good condition.

I'll be looking for $15990.00 with the OE wheels which look very good IMO or $169900.00 with the ENKEI wheels .(The Nexen tyres will be on either.)

If you're interested in making an offer iether post or PM me , I am also interested in a trade for an BMW 318iS Auto (with some cash my way on this one) .

Please lowball if you feel like it I'll have some fun replying. :)

Here are some pics.

skylinef.th.jpg

skylined.th.jpg

skylinea.th.jpg

skylinecy.th.jpg

And one from when I bought the car to show the stock wheels.

skyline1n.th.jpg

Hi Do you still have the car, if so please PM, I tried to PM you but being new to the Forum I was unable,see my post.I live at Burleigh

Cheers

PM sent--- :P Yup, I still have the car , Have to chuckle at your tag, I'm 61yo so I guess that makes me ancient ole fart :)

looks nice, if only you were selling in a couple of months time when i get my car allowance :ermm:

I'll be putting it on carsales tomorrow as now I've decided to sell I'd like to move it along but at tha rate it's going I may still have it in a couple of months. I'm wondering if I've put it on to cheap and people think theres something wrong with it , I looked on carsales and all the ones roughly comparable were asking about 3 or 4 grand more.

:(

Seems like a good price but im still not sold on Neos, may be the case with others or possibly my stupidity

Apart from posting unwarented negative shit on a for sale post which is not appreciated and at the risk of oppening a can of ignorant worms WTF do you think is wrong with Neos ? the car runs like a charm and pulls like a mad donkey when sticked -and its stock .

If you've got negative shit to post start a new thread and we'll all join in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...