Jump to content
SAU Community

Recommended Posts

Hi All,

Just wondering if anyone out there has managed to get the OBD-II side of things working in their V35? I have a 2003 V35 350GT and I recently purchased a OBD-II interface unit off good old eBay which claims to be compliant with most protocols. After trying to connect to the car through numerous programs, the best result I have had to date is with a Palmer Performance ScanXL trial. This software will actually connect with my car but doesnt appear to recognise any of the parameters (PIDs) whereas most other software including Centrafuse, Nissan Data Scan, Autoenguity and many others, dont even connect to the car.

Is there any particular trick to getting the car to talk to the software properly? I have installed the necessary virtual com ports to allow the USB to act a a serial port and the physical link between the car and computer is sound as data is passed between both. Im beginning to think that the hardware i purchased simply wont work with the car due to some sort of protocal difference. Maybe its just a case of I got what I paid for!

Reason I am trying to sort all this out is as I get a beeping noise coming from my centre console randomly when the ignition is on. Previous suggestions from members have not yeilded any results so I thought I would try to see if I get any error codes that instantly clear when the noise occurs. Any assistance from anyone who has already got OBD-II working on a 2003 V35 would be greatly appreciated.

Regards

Laine

  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/321982-v35-obd-ii/
Share on other sites

it speaks a variant of J1850. that said the only beep you should have in the middle of the dash will be the screen. it you are getting that I would say the service reminder is active.

  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/321982-v35-obd-ii/#findComment-5252076
Share on other sites

I don't think you will find any OBDII software to work with your 2003 V35 350GT. My ECM doesn't speak OBDII at all, only Consult II protocol. It might be that there was no requirement in Japan to support OBDII protocol back in 2003. Even though all G35 Infinities support it.

Nissan DataScan II will work with your car and you will be able to diagnose and monitor the engine ECU (ECM). The beeping noise might not be related to the ECM though.

Cheers,

Tom

  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/321982-v35-obd-ii/#findComment-5252230
Share on other sites

I too have tried the ones on eBay with no luck. It seems that the only cable supporting our car is the BlaZt II : http://www.blazt.biz/information/cars.php

has anyone tried and confirmed this? G33K perhaps?

I ordered one last week to test on the V35 for Blazt , so I will let you know how it goes

Edited by Cra-Z-Boy
Link to comment
https://www.sau.com.au/forums/topic/321982-v35-obd-ii/#findComment-5253575
Share on other sites

Hi All,

Thanks very much for the info and as everyone has mentioned, it appears I was misinformed on its capabilites!

With regards to the beep, I have tried pretty much everything I can physically change, including all the service reminders etc, with no luck. My six stacker's feed mechanism is busted and I think it might be related to that seen as I have been unable to find anything that might trigger it.

Anyway, looks like I will be living with the 'beep' for now!

Cheers

Laine

  • Haha 1
Link to comment
https://www.sau.com.au/forums/topic/321982-v35-obd-ii/#findComment-5254104
Share on other sites

Wtih the Blatz, can you see anything other than the ecu? body control module, transmission control module (auto).....

Not yet. Only ECM is supported at the moment.

Another option is Autoenginuity with Nissan enhanced support module. The real time data updates and data logs are really slow though.

Link to comment
https://www.sau.com.au/forums/topic/321982-v35-obd-ii/#findComment-5258080
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...