Jump to content
SAU Community

Recommended Posts

just selling my wheels, looking to get some new 17's. will swap

a few gutter rash marks and dents and chips but nothing that cant be fixed no buckles

black with chrome dish/lip, 18x9.5 front (tyres 50%) 18x11.5 rear (tyres 85%)

came off my r32. chasing around $1100 ono

DCP_0369.jpg

DCP_0370.jpg

DCP_0371.jpg

DCP_0363.jpg

Link to comment
https://www.sau.com.au/forums/topic/322017-fs-black-with-chrome-dish-wheels/
Share on other sites

I'd say offsets are high 40s even

as 18x9.5/11.5 will not sit on stock front/rears r32gtst guards like that with that size tyre and no negative camber if hewas running offsets lower than +30

either that or they're a 18x8.5/9.5 with high 20s low 30s offset

saying that the wheels look pretty good and cheap asking price, what are the tyre specs? 2??/35/R18

i think the offset was around the +37 mark, or it might have been +47, i cant remember exact but hopefully i get either 2moro or the next day off and will get the exact offset for you.

and 265 and 235 tyre widths with a tad of stretch.

^ pics emailed.

stunn-R, if you also cant see the pics, pm me with your email address and i will send them through.

Hi,

Would you be able to find out what make are the wheels if the stickers are still there?

cheers

Alex and Tim

wheels are altstadt . still have the stickers but are barely visible

exact offset is +42

also, sorry but the rears are actually 10.5" at the rear.

Edited by d_soljah
  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...