Jump to content
SAU Community

Recommended Posts

I'm looking to upgrade the fuel system with 2 x bosch pumps and a surge tank.

To keep it legal the fuel system cant be mounted in the boot, plus id like to keep the boot space. With the limited room underneath how have people over come this problem?

PS: I have a 32 GTST.

Edited by Alf
Link to comment
https://www.sau.com.au/forums/topic/322054-undercar-surge-tank-pumps/
Share on other sites

I'm looking to upgrade the fuel system with 2 x bosch pumps and a surge tank.

To keep it legal the fuel system cant be mounted in the boot, plus id like to keep the boot space. With the limited room underneath how have people over come this problem?

PS: I have a 32 GTST.

Autosport (I think its brads R32 gtr) had this set up.. looks very neat.

Speak to EFI performance. Pierburg external fuel pump. No need for surge tank.

A pump alone wont be enough when the fuel in the tank moves away from the intank pump, thats why a surge tank is needed.

I'm using an 023 intank.

Edited by Alf
A pump alone wont be enough when the fuel in the tank moves away from the intank pump, thats why a surge tank is needed.

I'm using an 023 intank.

Yes I know what a surge tank is for. I understand what you are saying but I have been assured you wont need one with this setup.

Here is a 'quote' from an email from Rick at EFI

"We recommend you look into an extra external pump we use and recommend (pier berg) high volume fuel pumps which are a draw and push pump capable of 350L per minute @ 3bar where the bosch 044 external is only a push pump and with its expensive fittings ect they are rated at only 200L per min @ 5bar."

"We have used these pumps on over 40cars now and are really taking off, they can be used with C16, methanol and are also E85 user friendly where the bosch pumps are not."

Like i said, I reccommend speaking to the EFI guys. They are really helpful and great to deal with.

Any love for the PierBurg?

Edited by RBceffy25
Yes I know what a surge tank is for. I understand what you are saying but I have been assured you wont need one with this setup.

Here is a 'quote' from an email from Rick at EFI

"We recommend you look into an extra external pump we use and recommend (pier berg) high volume fuel pumps which are a draw and push pump capable of 350L per minute @ 3bar where the bosch 044 external is only a push pump and with its expensive fittings ect they are rated at only 200L per min @ 5bar."

"We have used these pumps on over 40cars now and are really taking off, they can be used with C16, methanol and are also E85 user friendly where the bosch pumps are not."

Like i said, I reccommend speaking to the EFI guys. They are really helpful and great to deal with.

Any love for the PierBurg?

Forgive me if I'm wrong, but a draw/push pump is self priming? It can recover from the air in the fuel lines quicker?

I still can't see how this is supposed to replace a surge tank.

The system on steves gtr was built and designed by myself from steves guidline of everything in one unit under the car.

The current ones I'm using on my GTRs have individual chambers supplying the pumps and are foam filled to settle the fuel a bit more.

I rather use them with dash fittings as opposed to barb tails and clamps.

They work well and are realativly inexpensive.

Ive seen a few jap gtr's with a similar design is it based on a sard item?

It's not based on a sard item.

I jacked my car up, saw a large space near the driveshaft with nothing there, went to autosport and told them what to do and what I wanted. Greg and brad did the rest. I can't weld to save my life.

I wouldVe liked it to be tucked up further but then it wouldn't be as big. Flow was a concern as Brad and Greg figured out the tank had to be over 4L for the pumps I'm using.

The timing worked out great, they fitted all the rest of the fuel setup and the motor aswel. I always recommend them.

Yes I know what a surge tank is for. I understand what you are saying but I have been assured you wont need one with this setup.

Here is a 'quote' from an email from Rick at EFI

"We recommend you look into an extra external pump we use and recommend (pier berg) high volume fuel pumps which are a draw and push pump capable of 350L per minute @ 3bar where the bosch 044 external is only a push pump and with its expensive fittings ect they are rated at only 200L per min @ 5bar."

"We have used these pumps on over 40cars now and are really taking off, they can be used with C16, methanol and are also E85 user friendly where the bosch pumps are not."

Like i said, I reccommend speaking to the EFI guys. They are really helpful and great to deal with.

Any love for the PierBurg?

they dont say anywhere that the dont require the use of a surge tank and all pumps have to pull push as the fuel doesnt get gravity feed into them.

It's not based on a sard item.

I jacked my car up, saw a large space near the driveshaft with nothing there, went to autosport and told them what to do and what I wanted. Greg and brad did the rest. I can't weld to save my life.

I wouldVe liked it to be tucked up further but then it wouldn't be as big. Flow was a concern as Brad and Greg figured out the tank had to be over 4L for the pumps I'm using.

The timing worked out great, they fitted all the rest of the fuel setup and the motor aswel. I always recommend them.

thats a perfect spot stevo. for a little more detail its the same on the GTSt and the spot is on the drivers side just in front of the back wheel. basically under the rear seat.

The system on steves gtr was built and designed by myself from steves guidline of everything in one unit under the car.

The current ones I'm using on my GTRs have individual chambers supplying the pumps and are foam filled to settle the fuel a bit more.

I rather use them with dash fittings as opposed to barb tails and clamps.

They work well and are realativly inexpensive.

Any idea on prices to get one made up (to suit an R32 GTR)?

My mate and I made one the same as the process west unit for his xr6 turbz. Except instead of a billet tank welded down I just folded it up out of 3mm ally and welded it down to a lasercut plate. Turned out much the same and saved the expense. No need for a flashy unit when its tucked under the car and getting dirty constantly.

Edited by r33_racer
The system on steves gtr was built and designed by myself from steves guidline of everything in one unit under the car.

The current ones I'm using on my GTRs have individual chambers supplying the pumps and are foam filled to settle the fuel a bit more.

I rather use them with dash fittings as opposed to barb tails and clamps.

They work well and are realativly inexpensive.

Any idea on what one of these surge tanks cost?? Was it a custom one off job or an off the shelf item?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...