Jump to content
SAU Community

Aftermarket Dash Leds + Parts R34 Gt-t Coupe

sidewinder11
 Share

Recommended Posts

sidewinder11 Contributor

sidewinder11

Posted
Posted (edited)

Hey Guys

Time to clean out the garage. Parts listed below are for 1998 ER34 GT-T Coupe

Brand New in Box never opened Set of Front & Rear RDA Slotted Rotors $480

Brand New in Box never opened Set of QFM Performance Front (DB 1170) & Rear (DB1220) Brake Pads $250

Brand New Set Dash LEDs (Blue colour) $18

Brand New Set Climate Control LEDs A/C LCD & Button Backlights LEDs (Red colour) $15

Stock/Factory Catback Exhaust in Good Condition $80 (can provide De-cat pipe if needed)

Stock/Factory Front dampers (with springs without top ends or rubber boots) Rear dampers (no springs, boots no top ends) $100

Stock/Factory Front pair of Camber & Castor Bushes (non adjustable) v.good condition almost new only used for 500kms $100

Stock/Factory Rear tail lights (L&RHS without cover) $200

Standard Bolt on Exhaust Silencer to keep it under 90dbs (will fit most exhausts) $50

Reasonable offers will be considered. Located in Pascoe Vale.

Pm preferred or Txt on 0423 218805

Cheers

Jay

Edited by sidewinder11
sidewinder11 Contributor

sidewinder11

Posted
  • Author
Posted (edited)
Hey Guys

Time to clean out the garage. Parts listed below are for 1998 ER34 GT-T Coupe

Brand New in Box never opened Set of Front & Rear RDA Slotted Rotors $480

Brand New in Box never opened Set of QFM Performance Front (DB 1170) & Rear (DB1220) Brake Pads $250

Brand New Set Dash LEDs (Blue colour) $18

Brand New Set Climate Control LEDs A/C LCD & Button Backlights LEDs (Red colour) $15 SOLD

Stock/Factory Catback Exhaust in Good Condition $80 (can provide De-cat pipe if needed)

Stock/Factory Front dampers (with springs without top ends or rubber boots) Rear dampers (no springs, boots no top ends) $100

Stock/Factory Front pair of Camber & Castor Bushes (non adjustable) v.good condition almost new only used for 500kms $100

Stock/Factory Rear tail lights (L&RHS without cover) $200

Standard Bolt on Exhaust Silencer to keep it under 90dbs (will fit most exhausts) $50

Reasonable offers will be considered. Located in Pascoe Vale.

Pm preferred or Txt on 0423 218805

Cheers

Jay

Edited by sidewinder11
sidewinder11 Contributor

sidewinder11

Posted
  • Author
Posted

Hey Guys

Time to clean out the garage. Parts listed below are for 1998 ER34 GT-T Coupe

Brand New in Box never opened Set of Front & Rear RDA Slotted Rotors $480

Brand New in Box never opened Set of QFM Performance Front (DB 1170) & Rear (DB1220) Brake Pads $250

Brand New Set Dash LEDs (Blue colour) $18 SOLD

Brand New Set Climate Control LEDs A/C LCD & Button Backlights LEDs (Red colour) $15 SOLD

Stock/Factory Catback Exhaust in Good Condition $80 (can provide De-cat pipe if needed)

Stock/Factory Front dampers (with springs without top ends or rubber boots) Rear dampers (no springs, boots no top ends) $100

Stock/Factory Front pair of Camber & Castor Bushes (non adjustable) v.good condition almost new only used for 500kms $100

Stock/Factory Rear tail lights (L&RHS without cover) $200

Standard Bolt on Exhaust Silencer to keep it under 90dbs (will fit most exhausts) $50

Reasonable offers will be considered. Located in Pascoe Vale.

Pm preferred or Txt on 0423 218805

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • MBS206
      Cas issue

      By MBS206 · Posted

      It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • nash47
      Cas issue

      By nash47 · Posted

      Yes sir am asking is there possible way from aem tuner from wiring pins 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...