Jump to content
SAU Community

Recommended Posts

hi all

i did a search before but forgive me if this has already been asked.

i currently have sumitomo HTR ZII all round on my car

they are forward directional, but also inside/outside specific

dont want to get into a tyre debate here lol

i have a bit of inside camber wear going on...so what i need to know is

can the tyres be flipped from side to side, putting the *outside* on the inside...to even up the camber wear?

obviously the tyre has been designed that way for a reason but i was just wondering how much difference it actually makes.

thanks

Link to comment
https://www.sau.com.au/forums/topic/322654-directional-and-side-specific-tyres/
Share on other sites

got the same tyre on my car.

i flipped the rears didnt notice any diffrence but in the wet they might not be as good?

cheers mark

i might just give it a go, its either that or get new ones so might as well.

I run tyres backwards on the rim often in the race car, in the dry, there is no noticeable loss of performance

However I think you are mad to do the same on a street tyre. There are 2 key things that are different - as Mark said the wet performance suffers because the tyre is not designed to pump water in the direction you are running it. Also it is possible the internal construction may have a problem running backwards eg steel belts loosening.

If it was safe to run these tyres backwards the manufacturer would say so - they only use assymetric or directional design when they have to to meet a certain performance goal.

On a related topic....what is your wheel alignment (camber and toe, front and rear)? If it is out you are better to address the problem than throw new tyres at it.

Why not swap the tyres onto the opposite rim, so that the tyre at least continues to rotate in the same direction - ie, take the tyre off the LH rim, and mount it on the RH rim, with the "outside" now "inside". Only the inside / outside property would be compromised.

mark maybe the zIII are different because mine are definitely direction as well...

im aware its not an ideal but just trying to get a bit more life out of the tyres before i have to replace them

also am aware i should really address the cause of the camber wear, im assuming adjustable camber arms will enable this to be resolved?

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...