Jump to content
SAU Community

Recommended Posts

Hi all, thought I would start a new thread as I'm not open to swaps anymore and just after a normal sale.

I Love my R34 but need to sell it so I can start saving money for other things.

It is immaculate inside and out, only a few marks on the rear bar. I'm having the font bar resprayed in the next week or so. I searched for a fair while before I bought this GTT, it has all the features you would want ie Nismo kit, suspension and gauges all factory, and with the mods done to the car it is quite the performance car.

Has a factory sunroof, DVD player, autometer boost gauge (lights up red like dash), climate control, central locking, tinted windows, Nismo 3 gauge setup & cluster standard.

Mods were carried out by Status tuning and the tune by Dr.drift.

Performance Features....

- Splitfire coil packs

- 550cc injectors

- 550 hp ATR-43 turbo

- Z32 Air flow meter

- Stealth return flow front mount intercooler

- Greddy turbo timer

- Nistune ECU

- Trust turbo back exhaust

- Extreme heavy duty street button clutch

- Walbro fuel pump

- Tuned by Dr Drift on a safe tune of 236rwkw at only 15psi, easy to drive (I drive it everyday) and decent fuel economy. Will easily get 450kms to 50 litres with highway driving.

The wheels are 18's, with Kumho ku36's on the rear.

Just fitted a new battery recently to.

Looking for $20,000 as is. Wont need anything for rwc, maybe front tyres. Will sell with rwc will have to sell for more $$$.

If anyone is wondering about the plates in the pics the car does not have them anymore. The reg is XKZ 496.

http://www.carsales.com.au/all-cars/privat...id=128F040C1E00

Contact via PM

Cheers.

post-58557-1275380887_thumb.jpg

post-58557-1275380962_thumb.jpg

post-58557-1275381001_thumb.jpg

post-58557-1275381035_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/323093-r34-gtt-vic/
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

I have already bought another car sorry so no swaps.

Bumpage.

Will be getting the car back this weekend and will have had the front bar resprayed aswell as a few bits and pieces so the paint should be pretty awesome :whistling:

Link to comment
https://www.sau.com.au/forums/topic/323093-r34-gtt-vic/#findComment-5346635
Share on other sites

Car is back on the market, sale fell through.

Someone please buy this :( , you'd be hard pressed to find a decent stock example for around 19k yet alone one like this that atleast has some decent mods done and has been treated well by all its owners.

I'm willing to accept 19k for it till reg expires next month, after that I'll porb end up keeping it so if anyone is considering mine now is the time to buy it.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/323093-r34-gtt-vic/#findComment-5356809
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...