Jump to content
SAU Community

rearend sliding out??

Amir

By Amir,
in General Maintenance

 Share

Recommended Posts

Amir Rising Star

Amir

Posted
Posted

In the last few days, every time I go over even slightly bumpy surfaces the rear-end moves slighlty sideways.- like it does when you loose traction in the wet. This is occuring even on dry roads.

The tyres are not worn.

Have I worn out/ broken something??

It's getting a little scary to drive now.

Thx

Oz.

Link to comment
https://www.sau.com.au/forums/topic/32341-rearend-sliding-out/
Share on other sites
The Jester Of Oz Rookie

The Jester Of Oz

Posted
Posted

Sounds like you've done something nasty to your suspension.

I Had the same problem last month-the problem was my left rear shocker. It had leaked out all it's oil over the previous couple of days. Nice big oil blot on the driveway under the left wheel the next morning.

Bobjones Mentor

Bobjones

Posted
Posted

I would check the rear shockies and lower control arm bushes and this would cause excessive rear movement and thus cause the "sliding" you are referring to.

It sounds more like a shock as the active rear end in a skyline is less susceptical to thsi problem in relation to worn or broken bushes...

dAVE Grand Master

dAVE

Posted
Posted

Easiest thing is to take of your rear wheels and inspect shocks for oil leak.

My car came from japan with a slight oil leak in the rear left shocker... exactly the same symptons... i suggest u get it replaced soon.. i had a very interesting incident where I was driving in a straight line at 200k+ and hit a bump and the rear just jumped out.

DAMN scary.. lucky I was on a private track!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Nismo GT Pro LSD configurations

      By GTSBoy · Posted

      I would be very confident that they are the same parts (the 2 different SKUs). It seems very clear that you can drop the cam in the 2-way opening, or in the other opening. If you arrange it in the other opening in the same way that you see any other 1-way diff, ie, with the flat of the cam up against the 1° side of the opening, then it would work as a 1-way. It can only spread the ramps when driving forwards - cannot spread the ramps on overrun. It would then appear obvious that if you put the cam into the opening "backwards", that you would get the angled flats of the cam working onto the "points" of the 1° side of the opening, which would give you ramp spread in both loading directions. I do wonder if the forward direction of the 1.5-way config is equivalent to the forward direction of the 2-way, seeing as the cams are flipped and the angled surfaces on those would need to be the same on each side - AND - clearly when installed in either the 2-way or 1-1ay configuration they are not intended to work exactly the same (the ramp angles on the 2-way are 10° different between forward and backward, and the ramp doesn't exist in the 1-way config). 'twere me, I think I would rather actually have a set of rings that offered the 2-way with two different sets of ramp angles, say the 55/45 of the existing design and maybe a 45/37.5 combo for a less aggressive effect), AND another set of rings with a dedicated 1.5-way opening and a dedicated 1-way opening. The 1.5-way opening would actually have the steeper angle on the overdrive side that causes it to be less pushy than the forward drive angle, like you see in many other diffs. But really - if this Nismo thing is thought out properly and all those surfaces work on each other the way that they need to, who am I to argue?
    • GTSBoy
      Nismo GT Pro LSD configurations

      By GTSBoy · Posted

      I would be very confident that they are the same parts (the 2 different SKUs). It seems very clear that you can drop the cam in the 2-way opening, or in the other opening. If you arrange it in the other opening in the same way that you see any other 1-way diff, ie, with the flat of the cam up against the 1° side of the opening, then it would work as a 1-way. It can only spread the ramps when driving forwards - cannot spread the ramps on overrun. It would then appear obvious that if you put the cam into the opening "backwards", that you would get the angled flats of the cam working onto the "points" of the 1° side of the opening, which would give you ramp spread in both loading directions. I do wonder if the forward direction of the 1.5-way config is equivalent to the forward direction of the 2-way, seeing as the cams are flipped and the angled surfaces on those would need to be the same on each side - AND - clearly when installed in either the 2-way or 1-1ay configuration they are not intended to work exactly the same (the ramp angles on the 2-way are 10° different between forward and backward, and the ramp doesn't exist in the 1-way config). 'twere me, I think I would rather actually have a set of rings that offered the 2-way with two different sets of ramp angles, say the 55/45 of the existing design and maybe a 45/37.5 combo for a less aggressive effect), AND another set of rings with a dedicated 1.5-way opening and a dedicated 1-way opening. The 1.5-way opening would actually have the steeper angle on the overdrive side that causes it to be less pushy than the forward drive angle, like you see in many other diffs. But really - if this Nismo thing is thought out properly and all those surfaces work on each other the way that they need to, who am I to argue?
    • GTSBoy
      Replacing Fuel Pressure Regulator

      By GTSBoy · Posted

      Yuh, but that one is NLA. There might be an equivalent, but I haven't looked.
    • Duncan
      Replacing Fuel Pressure Regulator

      By Duncan · Posted

      If you hadn't bought a stand alone one already, nismo make a bolt on adjustable FPR https://www.efisolutions.com.au/nismo-fuel-pressure-regulator-sr-rb-s13-180sx-r32
    • tidi0x
      Nismo GT Pro LSD configurations

      By tidi0x · Posted

      I know and understand they are principally the same. They both cause lock under decel, but the 1.5 nomenclature implies "half" or less locking force, or it allows for more slip or a speed differential between both wheels. Right now the driving manners with the 2 way is pretty rough on transient to full off throttle in the backroads. In other words letting off the throttle too rough is not forgiving, great for drifting, tougher for controlled grip driving.      Yeah, I have watched that video a couple times, I am more so just looking for the confirmation that both part numbers offer the same ramp architecture and are just different settings from the factory.     38420-RSS15-B5  38420-RSS20-B5
×
×
  • Create New...