Jump to content
SAU Community

Recommended Posts

Hi Everyone,

I've got this problem that occurs only when i turn to the right, it jerks. It occurs at both high and low speeds but with revs around 2-2.5K. Usual conditions are: Car is warm, turning tight-ish sweeping bends, large roundabouts or large and fast diameter circles. I have no problems at intersections/tight carparks and parking (needs speed). My car is manual.

What occurs through the turn/bend is what i can best describe as JERKY: The sensation is like being in a very responsive gear such as first, accelerating up to speed (say 4k revs) and then suddenly letting your foot off the accelerator and then slamming it back on, on and off repeatedly. Its that agressive.

This of course occurs in whatever gear i'm in. The above is an example of what it feels like through the turn. If i were to be able to pick up enough speed in the wet, the response would certainly induce lift off oversteer.

A few thoughts:

1. At first i thought my injectors were playing up: But noticed it ONLY occured on right turns

2. Thought it was fuel sloshing to one side of the tank and not having the fuel pump pick up petrol: But i had a full tank of fuel

3. Friend suggested it may be HICAS related: But since HICAS only affects steering the rear wheels, and the motors used to turn them couldn't possibly cause such an agressive response from the engne.

4. Diff related/Power Steering: Unsure. It certainly feels like the engine. Unless somehow the diff is suddenly binding up and releasing itself instantaneously. I don't think power steering would cause such a response to the engine. Similar to that of air-con, the engine easily compensates for the power drawn to operate them.

5. Fuel filter/AFM/Fuel-related: It only occurs through right turns though.

If anyone can please throw some ideas/suggestions/first-hand experiences with this sort of problem that would be greatly appreciated, before i spend the little money that i have. To me, its a real nutter.

Thanks all,

Will.

Edited by tranman
Link to comment
https://www.sau.com.au/forums/topic/323618-r33-gtst-engine-problem/
Share on other sites

Hi all,

Was reading about oil surge out of interest on google, and then thought about fuel surge. But since i mentioned that i had a full tank i ruled it out. However on a motorsport forum a few blokes mentioned:

1. "I experienced surging in my poor old 6 cyl VK which used to fuel surge on right hand corners(no matter how full the tank)"

2. "Yes this is a common issue with Gemini....sweeping corners are the worst"

Direct Link: http://www.bmsc.com.au/forums/rallying-tec...fuel-surge.html

What do you guys think? I dunno if it applies to me as they referred to CARBY engines (gemini, dunno about the VK).

Cheers,

Will.

Yeah standard diff. Will have a poke around to see if there is any obvious wear/damage to the mounts and any wires when the weather is better. I don't think that would help tho.

The engine mount may well act as a cushion to the whole effect in that the hesitation/jerkiness is absorbed somewhat before being directly transferred down the drivetrain. It wouldn't seem to be the actual cause. But like i said i will have a poke around....its raining atm.

Edited by tranman

A small outlay can reveal much if you get a 50 point check through one of the reputable franchises of Repco/Jax/Pedder in your area.

Some of those can be shonky too; so I would insist on being present during the inspection.

If I were in your shoes, I'd want to see if it was an electrical short, rack, suspension, bearing, mount, left CV or whatever.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...