Jump to content
SAU Community

Few Questions...it's Been A While.

Ryanrb25

By Ryanrb25,
in South Australia

 Share

Recommended Posts

Ryanrb25 Grand Master

Ryanrb25

Posted
Posted

Long time no type :down: I think it's time i got my car back on the road after 10 months off the road. Can anyone help me out on the where abouts to get child restraints put in the rear? It needs to go through regency and that's the only thing amongst quite a few that i think im going to have trouble with. Also, I need a set of standard rear shocks, mine have been sitting around and the seals are shot. Would be much appreciated.

Thanks in advance

I miss it :blink:

333.jpg

Link to comment
https://www.sau.com.au/forums/topic/323736-few-questionsits-been-a-while/
Share on other sites
Luke_ENR34 Grand Master

Luke_ENR34

Posted
Posted

Hey mate.

Do u need all the child restrant bolts and covers? Pretty sure I got them. I would drill 3holes. One under each speaker and one in the middle with a nut on the end. They don't really look into them just make sure they are there and don't move.

Luke

Dohmar Grand Master

Dohmar

Posted
Posted
Long time no type :blink: I think it's time i got my car back on the road after 10 months off the road. Can anyone help me out on the where abouts to get child restraints put in the rear? It needs to go through regency and that's the only thing amongst quite a few that i think im going to have trouble with. Also, I need a set of standard rear shocks, mine have been sitting around and the seals are shot. Would be much appreciated.

This is a real long shot, not sure if they'll fit, but I have some Teins for r32 gtr sitting in my shed doing nothing, you're welcome to borrow them if they fit your 33.. (dont know since rear suspension differs between gts-t r32s and the gts4/gtr...)

-D

ovrtym33 Proficient

ovrtym33

Posted
Posted

Ryan ring up that import compliance place that used to be next to Japanese import spares, they installed mine for regency

the nuts bolts n brackets cost them stuff all but its the labour that cost the most, took him about 1 1/2 hours to fit and cost me about $130

im sure someone on here no's the name

Ryanrb25 Grand Master

Ryanrb25

Posted
  • Author
Posted
Hell yeah! Where you disappear to? Welcome back.

I have nothing to assist you, but best of luck. Would love to see the 33 back on the road.

:(

Thanks Mate

Hey mate.

Do u need all the child restrant bolts and covers? Pretty sure I got them. I would drill 3holes. One under each speaker and one in the middle with a nut on the end. They don't really look into them just make sure they are there and don't move.

Luke

Thanks Luke. I'll let you know..they might come in handy. :D

This is a real long shot, not sure if they'll fit, but I have some Teins for r32 gtr sitting in my shed doing nothing, you're welcome to borrow them if they fit your 33.. (dont know since rear suspension differs between gts-t r32s and the gts4/gtr...)

-D

Thanks anyway mate but after standard gear.

Mitch i think would know the name he lives at JIS

welcome back Ryan

did it get defected? why you have to go over regency?

Thanks Steve. It got defected on a quiet Sunday morning driving to the servo to wash it about 10 months ago. Got defected for Track and too low. I didn't care too much. First time in 4 years it'd been defected. I put it in my workshop at work and totally forgot i owned it but it's collected enough dust now and needs to have it's cherry popped once again :O.

Dohmar Grand Master

Dohmar

Posted
Posted
dam those servo runs

been done many a time going to get grog or smokes

u can get grog from servos these day? i wish..

iced coffee and mrs macs pies are the go tho for the servo runs, better than wasting cash on crapdonalds

-D

scandyflick Grand Master

scandyflick

Posted
Posted
he needs eye shape ends so no gtr or r34 gtt stuff. NA r34, r33, s15 have eye shape ends.

s15 and r33 are interchangeable?

if so, youre more than welcome to use the struts i got sitting in the shed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...