Jump to content
SAU Community

Recommended Posts

Hi guys...looking at getting a greddy emanage ultimate installed on my AUTO...r33 gtst. I know most tuners like efi, apc, 999, pits etc.. have speicalise in particular brands of ecu's, and I would just would like some help in deciding which tuner to pick that does good work with the greddy ecu's around south east QLD (either coast, brisbane etc).

Cheers

Link to comment
https://www.sau.com.au/forums/topic/323826-tuners-for-emanage-ulitmate/
Share on other sites

Pits wont.

I sold mine a few years ago in favour for the PFC, just so much easier.

Its a shame you cant use a PFC :D

PFC arnt all that man, ill rate emanage. keeps stock ecu cold start settings etc. MINT !!! piggy back

hitup STZ fo sure.

im in the middle of getting an emanage myself :domokun:

Thanks for the help everyone!!! STZ sound pretty good for the emanage and anymore info....KEEP IT COMING LOL......

finally a bit off topic, but has anyone got info on whether or not a z23 vg30dett AUTO ecu, will work as a replacement for the ecr33 auto ecu??? because if that was the case i could also concider a nistune for my ecu option aswell.....

I had an emanage ultimate for a year or 2.

seemed to have loads of problems, so I got rid of it and went for a nistune -more reliable, cheaper, more choice of tuners, etc.

i like the idea of the emanage, but i dont think they work so well with 34's

now very happy with Nistune

Yeah believe me, if i can find out if i can get the z32 auto ecu, to work as a replacement for the ecr33 ill be getting a nistune no worries lol....

talk to EFI Performance. Sean has worked with nistune for ages. nice guys, very helpful.

Cheers pear,

yeah i had a few people on boost recommend EFI today aswell (for nistune), so im going to give them and nistune a call first thing tomorrow and see what they can do about my little ecu problem....

Sean at EFI said that shouldn't be any drama putting either r32 or z32 auto... ecu's in my car for a nistune, just that with the r32 ecu you will lose VCT, and with the z32 ecu they have to rewire for timing and injectors. Only effect on the auto transmission is a slight increase in lenght of the gear changes between 1st and 2nd. Also chasing an EMS Stinger ecu on here second hand ($600 without loom), but atleast i have a bit more of an idea on which way to go now... This has given me quite a bit to think about and thanks everyone for the help..much appreciated.

cheers...

good to hear

Finding an ECU you like is one thing, but finding a tuner you can trust AND one that can work with your preferred ECU can sometimes be hard!!

In hindsight, I should have picked my tuner 1st.

I know EFI do a lot more ECU's than Nistune, and in my books Sean is one of the best tuners I've seen.

ps. thanks tristan :domokun:

Ended up buying an EMS Stinger 4424 off a guy on Boostcruising...$650, which wasnt too bad. Keep the factory ecu (to control the auto) and wire the stinger in to control the rest. Means i dont have to swap factory ecu's and iv'e basically got a stand alone ecu, which i can use as a piggy back. I dont need a z32 afm either lol..so now i just need to get everything in the car and tuned....

post my results on dyno as soon as its all done...

cheers everyone for the input and if anyone has any more info that my help myself and or others with emanage tuners and tuners in general around southeast qld..keep it coming

thanks

brendan

  • 2 years later...

Hi ,

sorry to bring up an old thread but wanted info regarding this

Who can tune eManage Blue/Ultimate in Sydney? I am located near Hurstville.

Hey mate, This post is in the QLD section, so I would suggest you repost it in the NSW section you would get more responses there.

  • 2 years later...

obv a old thread but wondering if any updates on who tunes greddy emanage in Brisbane for current times did look for stz but no phone answering unsure if closed down or wrong number for current times if any1 could help be gr8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...