Jump to content
SAU Community

Recommended Posts

Hi all,

I have an R32 GTR which just had the engine rebuilt 2500kms ago. Its running HKS GT2530's which are also 2500kms old and a Power FC.

The car was running beautifully on and off boost (didnt hit above 0.2 bar boost for first 1000km's, not above 0.5 bar till 2000kms, now hitting 0.8 bar). The car is running way to rich and is being tuned in the very near future.

A problem has come up though, when coming onto boost the car gives a quick puff of white smoke, then goes brown/black as its overfuelling. I took the car back to the engine rebuilders, and he suggested its fuel vapourising in the exhaust from how rich its running, and although rare, he has seen it happen before. What are other peoples take on this?

I know constant white smoke is head gasket failure/cracked head/stuffed turbo, but this just makes a small puff as its coming onto boost and then it doesnt happen again.

Any ideas??

Link to comment
https://www.sau.com.au/forums/topic/32383-white-smoke-from-gtr-help/
Share on other sites

as the motor is fresh the oil rings would not have bed in properly yet. when coming on boost you will be evidencing the blow by if you still have your breather hooked up to the pcv valve. the dark smoke thereafter will be fuel if the mixtures are set rich. hope this helps.

It has only started happening in the past few days. The mechanic mentioned he might need to run an oil catch can, which I was going to do anyway, then checked the pcv breather pipes and intake pipes, and theres next to no oil in there. I would have thought after 2500kms the oil rings would have bedded properly?

if the oil is breathing through the pcv then you wont find oil in your inlet pipes. try running the pcv breather into a coke can temporarily just to see if thats where the oil is coming from. you mentioned you wre running the motor in on low boost but were you also putiing it under high load - 3 passengers and steep hills to prevent the bores from glazing?

Yeah when it was running in I followed everything I was told, putting it under load (going up a steep hill in 4th/5th gear at low rpm with two guys in it, me and my friend, and were not exactly small :Oops: ) never idle for too long, always varying rpm so never to keep it on a constant rpm and accelerating from 50km/h in 4th/5th upto 4500/5000rpm then backing off. Im pretty confident it was all run in properly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...