Jump to content
SAU Community

Who Lives In Bankstown And Free This Weekend To Check Out A Car For Me?


Recommended Posts

As topic states, There is a car of my interest in Mount Lewis, NSW.

I would greatly appreciated if someone is willing to go inspect the car on my behalf.

I'd prefer if the person willing to do me this massive favor to be generally switched on about cars.

I'd like them to inspect the car for:

- Rust

-Accident damage (inspect if all panels line up correctly)

-Engine conditions (Knocking, Exhaust blowing smoke, turbo noise etc)

-Interior condition (rips, cigarette burns etc)

-Modification's it has done.

Also If possible, to take some details Pictures of the car and email to me.

This would be great if someone can do me this, coz it save me time and money If i fly down for a lemon.

If you are interested, Please PM me and I will send you the Link on carsales.com

Thanks in advance,

Dush

Edited by Dush
What he said.

Gf lives nearby, always gives me plenty of ammunition and she loves the hektik accents I do :miner:

...and I thought you were a most decent and upstanding pillar of society :)

All in good fun. There's lots of lovely people around there. She gives me shit for living in Wollongong (everyone from Sydney considers us their inbred step-brother/sister).

To be honest I haven't spent enough time around there to be able to have an informed opinion on it; plan to do so though. Research!

ive spent some time around there, in padstow area, and im from newcastle, and welllll ill just say, i wouldnt live there, no offence to the bankstown folks, but yeah LOL worthy

im in padstow now but grew up in the area all my life. everyone thinks its ghetto for some reason but its by far the friendliest place this side of the parramatta river.

hey im living in bankstown myself.

im selling my r32 gts-t if your interested....

you might have seen it drive around....

calsonic blue with white rims

im asking 5500 for it..

engine is fine

just the highbeam switch and speedo cable needs to be replaced

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...