Jump to content
SAU Community

What Makes A Brembo Caliper "f50" Or "f40"?

_Wing_
 Share

Recommended Posts

T04GTR Grand Master

T04GTR

Posted
Posted
This is an F40 calliper. To the best of my knowledge it looks no different from an F50 - piston areas aside. It does look and is different from the Brembo's found on the R33's etc & from the current range of Brembo callipers.

Also to the best of my knowledge there is no difference between an F40 & an F50 pad (Which in turn is the same as a Brembo equipped BA Falcon, oddly enough).

Lastly I am not aware of there being any difference in the rotor sizes that these callipers can accomodate ie an F40 can go on a 324 rotor (like mine) a 343 rotor or a 355 rotor. As can an F50.

those are f40. f50 doesnt wrap around the disk as much.

ps. you can also use a "wide face" 355mm disc used by holden i think, in a 2 piece disc hat combo but using a custon hat.and use evo/sti pads for a much wider pad area

  • 10 months later...
Havoc1 Newbie

Havoc1

Posted
Posted (edited)

Heres my new puppies.

On the way from Japan at the moment, should be here next month.

Brembo 6pot with a 380mm rotor. Any idea what they are off?

Old thread but.... With some small exceptions in the bridge and brake hose attachment area, those calipers look a heck of a lot like the early version 6 pots used on some AMG Mercedes.

$4.5K? Wow, everything is spendy down there. I realize that's for calipers/rotors/mounting brackets, etc., but still! I bought a pair of the same calipers in the US for $730 in 2009, and they were practically brand new.

AMG Mercedes... ignore the OEM mounting bracket.

DSC04267.jpg

DSC04268.jpg

DSC04266.jpg

DSC04270.jpg

DSC04269.jpg

Edited by Havoc1
  • 4 weeks later...
gslrallysport Experienced

gslrallysport

Posted
Posted

all well and good, but what about pad and disc replacement costs? i prefer to stick with a nascar type pad wick can be had new dor less than 200 bucks, also 25-30mm thick...

We've got about 8 different options on pads for that Ford/Merc 6 piston Brembo, it's quite a common caliper.

With regards to Nascar pads, alot of the teams are switching to Project Mu now because, although more expensive than the current crop of US made stuff, they last ALOT longer, and the Nascar pads are distributed worldwide from PMU here in Australia, not Japan, so depending on what you're after, you'll be able to buy the PMu Nascar pads here cheaper than what you'll be able to if you buy a set having done a round trip around the globe. Yes, they'll be more expensive, but as most categories are finding now (particularly the V8's and Porsche Cup locally) the PMu gear lasts alot longer than most other big name brand stuff, so pays for itself pretty quickly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • Matt Z
      SAU NSW - Bathurst Run 2025

      By Matt Z · Posted

      🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah · Posted

      While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
×
×
  • Create New...