Jump to content
SAU Community

Thinking Of Buying A Tow-truck

geraus

By geraus,
in Victoria

 Share

Recommended Posts

geraus Mentor

geraus

Posted
Posted (edited)

Hey guys just wanted to know.... if i a buy a tow-truck(towing cars)what would be the things i need?

Do i need a Medium or Heavy Rigid license?

Do i need any speicial licence if i wanted to start as my own business?

cheers, if anyone here has any tow-truck experience let me know cheers, i want to get into the industry...

Geraus.

Edited by geraus
Link to comment
https://www.sau.com.au/forums/topic/324406-thinking-of-buying-a-tow-truck/
Share on other sites
Cowboy1600 Grand Master

Cowboy1600

Posted
Posted

Research the industry. Make sure it's something you really want to do.

I've known a few towies and it certainly takes specific types. It's a pretty shitful job.

If you do decide it's for you, then the license required will depend on the tow truck you want.

If you are doing heavy towing then I think you will need an MC license. You can drive the trucks on a HR license but once you have something on tow you need an MC.

If you just wanna do cars with a tray truck, you will only require an MR license.

Gimps idea is a very good one. Try and land a job with a tow company and see how you go.

krzysztof Mentor

krzysztof

Posted
Posted

i was actually discussing this with my old man few weeks back. i think it operates the same way as a taxi licence (ie. big money up front)

http://www.vicroads.vic.gov.au/Home/Morein...uckLicences.htm

geraus Mentor

geraus

Posted
  • Author
Posted

Well i spoke to vic-roads , all i need is a light regid licence, but im going to go for my heavy just incase for the future. The tow truck is under 6tone, it can tow cars as well but not at accident scenes. im going to be using this tow car to transport cars to mechanics etc. Cheers for the help guys, and if i get this truck i will be more than happy to help SAU out with towing cars :/

llama_au Grand Master

llama_au

Posted
Posted

We asked the second last towie I used (my car gets towed a lot...lol), the normal tray-back Nationwide tow truck he had only required a Medium Rigid license to drive however get the Heavy Rigid if you're going for your license so you're covered to drive a bit larger than that.

http://www.vicroads.vic.gov.au/Home/Licenc...ecategories.htm

ashneel Grand Master

ashneel

Posted
Posted

there is an SAU member who runs a tow business. Jack aKa JAGR33 http://www.skylinesaustralia.com/forums/JAGR33-m1569.html

im sure if you send im a pm he can give you allt he info needed.

W0rp3D Grand Master

W0rp3D

Posted
Posted
Research the industry. Make sure it's something you really want to do.

I've known a few towies and it certainly takes specific types. It's a pretty shitful job.

If you do decide it's for you, then the license required will depend on the tow truck you want.

If you are doing heavy towing then I think you will need an MC license. You can drive the trucks on a HR license but once you have something on tow you need an MC.

If you just wanna do cars with a tray truck, you will only require an MR license.

Gimps idea is a very good one. Try and land a job with a tow company and see how you go.

MC = multi combination = B double, gotta have a rigid license for 12 months then get a HC = heavy combination = semi then you can get an MC license, defenately more than he needs.

Well i spoke to vic-roads , all i need is a light regid licence, but im going to go for my heavy just incase for the future. The tow truck is under 6tone, it can tow cars as well but not at accident scenes. im going to be using this tow car to transport cars to mechanics etc. Cheers for the help guys, and if i get this truck i will be more than happy to help SAU out with towing cars :banana:

Another vic roads nufty that does not know what his talking about, no such thing as a light rigid license, there is only an MR = medium rigid = single axle at the back and HR = heavy rigid = twin axle at the back, with the HR you can get one with the conditions of auto, synchro and non synchro gearbox, non synchro is a lot harder and i have only ever seen 1 rigid with a non synchro box.

W0rp3D Grand Master

W0rp3D

Posted
Posted

An from what i know of a tow truck license there are two types, the hardest one to get is one where you see TOWxxx on the trucks number plates, these are able to attend accidents and tow damaged cars, the other is just a normal rigid license but you are not allowed to tow from accidents, purely car transport.

And if you want to add a tow bar and tow a trailer as well then you can do that on a MR or HR as long as the gross of the trailer is 9 ton or less, over 9 ton and you need a HC.

W0rp3D Grand Master

W0rp3D

Posted
Posted
My brother just did his Heavy Rigid license in a crash box (non-synchro), was telling me all about it. Sounds ridiculously difficult. Passed with flying colours and he'd never driven one before.

Its all about timing, matching road speed and revs to the gear your changing into, makes me laugh to see a couple of people on here saying that its easy cos they double clutch there synchro box with out a problem, not so easy in a non syncho where you only have a few hundred rpm to get everything right or your screwed.

Cowboy1600 Grand Master

Cowboy1600

Posted
Posted
MC = multi combination = B double, gotta have a rigid license for 12 months then get a HC = heavy combination = semi then you can get an MC license, defenately more than he needs.

My bad, I meant HC.

W0rp3D Grand Master

W0rp3D

Posted
Posted
yes there is...? pretty much minibus specific though, no trucks as such (so i'm lead to believe)

well there ya go, they have changed shit again, looks like its basically the same as an MR but less weight and you cant tow a trailer, also now you have to have had a car license for 2yrs before you can get an HR license.

http://www.vicroads.vic.gov.au/Home/Licenc...ecategories.htm

RCHOO Grand Master

RCHOO

Posted
Posted
Yeh , the tow truck i found i want to buy is a small banna back one. Still doing my research.. thanks for info guys.

Think twice about the Banana back.

lowered cars are very hard to put on them.

Spend a bit more money and get a tilt tray you would be better off.

Also look in to repo companys for work..

geraus Mentor

geraus

Posted
  • Author
Posted

Thanks for the advice guys, i looked at this truck today it was pretty clean, took it for a drive and all runs good,looked at the motor and all as well. the ramps are really as well. Think i might try and get this truck! hmm what do you guys reckon? Tilt tray is to much for me, im gona start of small then try and get a tilt tray

img0673rv.th.jpg

Uploaded with ImageShack.us

img0672o.th.jpg

Uploaded with ImageShack.us

W0rp3D Grand Master

W0rp3D

Posted
Posted

lol@ the company name.

We have one of these isuzu's (or one that looks pretty the same) at work, it had lots of problems with snapping exhaust manifold and turbo studs, even after everything was pulled off and decked, dont know if ours was a lemon or its a common problem, it now sits in a paddock.

I see it already has a tow ball so you can add a tandem and carry 2 cars at once, the point about low cars is a good one but im your you could use another set of ramps to flatten the incline a little.

Do you already have a connection in the industry to get work through, that would be the biggest decider, if the works there then why not.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...