Jump to content
SAU Community

Recommended Posts

How long has the fuel been in the tank? As fuel ages it loses its octane rating (knock resistance), so old fuel = knocking.

When was the fuel filter last changed? If its creating too much restriction = less fuel pressure = less fuel in = more knocking/leaning out

Also, check that your fuel pump is getting the full 12v supply as the standard wiring doesn't allow the bigger fuel pumps to get the full 12v due to the amount of power they use compared to standard.

If it was a slight miss fire I think you should be able to feel it in the car or on the dyno as it maybe hesitant or pop through the exhaust. Even if its slight

But gap your plugs, standard gtrs run 1.1mm gap but if you increase boost it tends to blow the spark out. So i run .8mm gap on mine, but check what other people are doing on gts

Someone said before about the blow off valve and leaks, i don't think this would be an issue as if anything it would run rich and you maybe able hear the leak. Shouldn't detonate, even though it would be low on power because its rich not lean.

What Fmic are you running? if its a cheap item, maybe its not cooling the air sufficently. Which also causes knocking.

I don't think timing is going to be the issue of why you haven't increased power, as you still should be able to, to some extent. Most likely I think its going to be fuel system related.

Anyway, just my 2c of ideas to check

Hope this helps

Matt

the frontmount intercooler has been working perfectly , fuel pump is getting constant 12v power supply, there is no missfire, the blow off valve is a HKS SSQv it doesn't leak, the issue is i can't increase the timing to extract more power...so there is no point running more boost....the issue is not within the exhaust, metal intake pipe or even the front mount intercooler all joins are new and tightened there was no boost leak what so ever....i was talking to a mechanic mate and he told me if the cam timing was off by one tooth you'd lose power or something.

Cheers

Chi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...