Jump to content
SAU Community

Recommended Posts

Thinking of buying the above tv and seeing if anyone has got one and do they think its worth the money. I can get one for $3970 with 3d blue ray player and 4 glasses. i have had a go on one and im impressed. (just got to get the boss to agree)

They're a really good TV, just don't buy it for the fact that it's 3D.

It does a shit load more, get them to throw in the WIFI adapter with it, then you can

use internet TV and youtube and other stuff with more apps to come.

You can also whack an external HDD into the USB and record. And if you have an Iphone you

can download the free samsung remote app for it.

I work at Harvey Norman and that's a good price but i have seen them go for $3699 cash.

Give good marks for samsung tvs...we had an older 40' lcd that started playing up and wouldnt turn on as quick, we made a complaint and had a brand new model within a month..new one is awesome (I believe most of there newer products are) ,but yeah has internets and everything, can copy a movie on to my phone at friends house and play it straight thru the tv ,plus it can access all your media on your PC ,wireless if u like

Didnt know i could record to a hdd doobs.. are u serious, i got a series 6

...Great picture quality too..I used to wish i bought a sony but i dont anymore..

well i bought one today. ended up getting it for 3800 (incl 3d blue ray player and 4 3d glasses) also got 2 more glasses +5 yr warrenty+hdmi lead+ optical lead+ surge protector. at a grand cost of 4700. very happy with the price.

give us a quick review on it eric im planning to get one by the end of the month. is it just samsung that has 3d on the market atm. sorry havnt been keeping up with tvs since i bought an lcd when they first came out and it costs hell of a lot more than the asking price of the 3d now.

i get it on thursday but from what ive seen it has the following features

http://www.samsung.com/au/consumer/tv-audi...&returnurl=

media player, usb port so can just plug in external hard drive or flash drive in and will play from that.

100/200mhz (100hz on 2d and 200hz on 3d)

up scales 2d movies to 3d (not as good as a 3d movie obviously)

extended pvr so record to external hard drive

internet tv (stuff like youtube, skype, games, ect) can actually make skype video calls from your tv with add on camera

plays tv channels (obviously)

kills all the other led's with picture quality that i seen

full wifi system with the wifi dongle (about 69bux) can connect to mobile or computer

they are the main features

really need to get down to have a look yourself and also the 2 free glasses and 3d blueray player finish at the end of this month



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...