Jump to content
SAU Community

Recommended Posts

s15 eyelids $30

s15 washer bottle $20

s15 overflow bottle $20

s15 parcel shelf $20

s15 dual gauge pillar brand new $90

s15 genuine veilside rear bar painted blue $50

s14 sr20det long motor missing a few things suits rebuild $200

s13 180sx turbo back exhuast 3 inch $100

-4 fittings 180deg and 90deg $10ea or $40 for the lot i think theres roughly 8 fittings

-10 braided line 40cm and 30cm $20 the lot

brand new td05 oil drains x 2 $10 ea

2 x greddy td05h-18g cartridges require rebuild wheels are fine $25 for both

2 inch striaght silicone hose brand new will also throw in 4 assorted hoses as well $30

3 inch straight alloy pipe $15

s15 rear brake light $10

qld personlised plates 314 hfo (1 slimline 1 standard) $30

skyline radiator mounts with rubber $10

rb26 aftermarket o2 sensor adapters $10

rb26 pistons $60

rb26 sump baffles $30

rb26 brand new genuine nissan dump pipe gaskets $20

rb26 manifold-turbo gaskets $10

rb26 oil pressure sender $10

rb26 air con pump $50

5 inch canon $20

4 inch canon $20

4 inch canon with 2 bolt flange $50

car cover protects from snow hail rain and sun suits sports cars such as s15 s14 s13 r32 r33 r34 ect... $30

located on the gold coast

brad 0421511710

sms or pm for pics

Edited by toy515

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So I actually had the cover off my car today, here is a (bad) pic of the setup. I have an oil cooler thermostat block, the temp sender is straight in there. The pressure sender has a short AN line to a T piece which is mounted (hopefully cable tied counts as mounted....) on the chassis. BTW every fitting you could ever imagine exists....just depends what they cost and how many you need. Raceworx AN adapters are here: https://raceworks.com.au/fittings/adapters/, I think you said you need BSPT to AN (https://raceworks.com.au/fittings/adapters/bsp/tapered/an-to-bspt-adapters/) and AN to NPT (https://raceworks.com.au/fittings/adapters/npt/) BTW, braided line is super simple to make. It looks intimidating, is not.
    • Perfect day for a pie, really needs a soft top in this weather though
    • Prime parking, she is a little girl...LOL
    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
×
×
  • Create New...