Jump to content
SAU Community

Recommended Posts

I have a Bosch High Flow/High pressure fuel pump only been used for a few months already fitted to in tank fittings and wired up.

Numbers on pump are 0580254040 12V 586-22

$75.00

A set of 6 high flow injectors, side feed off a rb25det, in rail, or can sell seperatly, still reaserchin the exact specs they are red in colour.

$200

Rear bumper reo bar good condition straght $20.00

Front bumper serries 1 with indicators and park lights, i used it to get through road worthy a few times without a hassle. is skyline white, then sprayed spray can white over the top then spray black over that. looks shit but works well to pass a road worthy

$40

Hicas lock bar, few dings in it but will still work well $30.00

r33 rb25det air con compressor worked well no leaks $20.00

r33 fuel flap white in colour $20.00

Rear 17 tyres inner sholder is worn but rest is ok free

Can post all items items at buyer expence.

0425354614

or pm

Edited by goldgem
Link to comment
https://www.sau.com.au/forums/topic/326382-fs-sa-r33-few-parts/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They are, a good friend of mine bought one to replace his blow factory turbo, running a Toshi Tune reflash. Just use their supplied water/oil lines and you're good to go. At the time, they were like $900 delivered.
    • This is an option for 100% bolt on, the GCG high flow -  https://gcg.com.au/turbo-charger-upgrade-skyline-gtst-2iu-xtrgts-s1.html Also, I'm pretty sure hypergear does a high flow that is 100% bolt on, it just doesn't make as much power as their bigger high flows.  Even if you get a hypergear turbo that requires you to chance the intake piping, it is a really simple modification. It can be as simple as a piece of silicon hose and you pop a filter on the end. It doesn't have to be some crazy pie cut titanium work of art intake pipe.  If you have the ability to swap the turbo yourself, you would be able to sort the intake piping out. 
    • Just as a thought, if it's in neutral, thats your drive line disconnect, not the clutch. Clutch slip at the dyno with pedal fully out, is actually adding a second disconnect. So it's not a clutch issue if you're in neutral. Just a bit of friction dragging the output around while in the air.
    • The HG high flow is excellent, and costs about the $$ you're talking about. But it, and probably every other highflow, uses a diffeent core than the original turo, and the original Hitatchi core is quite long. So, I think it is inevitable that there is likely no such thing as a highflow that just "bolts on" with no other effort required. And the same is likely true for HG's outright replacement "bolt on" turbos (the ATR things). And the same is likely true for anything similar from elsewhere. I have no idea if the cheap Chinese/Taiwanese complete turbos from eBay/Temu/etc are as bolt on as they claim. I mean, they claim the bolt onto the NAs as well as the turbos, and we know that can't be "bolt on". But it wouldn't matter because I'm not buying a $169 4 psi turbo for anything other than a paddock basher.
    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
×
×
  • Create New...