Jump to content
SAU Community

Recommended Posts

I hate you guys.    :spank:

Here is a pic of a car I did a while ago.

wnos25teng.jpg

Happy now?

The plot thickens :P

That's the engine bay of my old car you just posted mate... What do you mean "here's a pic of a car I did a while ago?"

G'day, you're on the speaker with Andrew... Adrian I presume? :)

Great stuff!!! What tyres were you using? Very impressive for a FWD...

Any pics of the whole car?

I was using 22 x 8 x 15 MT's. I don't have any pics of the whole car handy, but it's just a stock looking black EK Civic.

BTW, I edited the post above for your benefit. Hope you like it!

I was using 22 x 8 x 15 MT's. I don't have any pics of the whole car handy, but it's just a stock looking black EK Civic.

BTW, I edited the post above for your benefit. Hope you like it!

I thought that was Mark's Civic? I saw it run a few times at EC... The entire crowd loved it... Sleepers like that are the best :)

The plot thickens :spank:

That's the engine bay of my old car you just posted mate... What do you mean "here's a pic of a car I did a while ago?"

G'day, you're on the speaker with Andrew... Adrian I presume? :)

No, I'ts Mark. I'm the one who did all the work while Adrian drank all of BD4's beer!!! (only joking).

What happened with the car?

No, I'ts Mark. I'm the one who did all the work while Adrian drank all of BD4's beer!!!  (only joking).

What happened with the car?

ROFL... Adrian claimed he had done most of the work :)

Well I bought it off Lee about 1.5 years ago, and I sold it about 2 months ago to a bloke down in Wollongong and moved onto a GTR (see avatar)

I did a few more tweaks to the car before selling it, but I never got around to building the engine, so I'm afraid it left my hands running a max of 1.2 bar and making 280rwkw...

Here's the spec sheet whilst I owned it: See if you can pick my additions :spank:

http://www.fortheboyz.com/cars/merli.php

ROFL... Adrian claimed he had done most of the work :)

Well I bought it off Lee about 1.5 years ago, and I sold it about 2 months ago to a bloke down in Wollongong and moved onto a GTR (see avatar)

I did a few more tweaks to the car before selling it, but I never got around to building the engine, so I'm afraid it left my hands running a max of 1.2 bar and making 280rwkw...

Here's the spec sheet whilst I owned it: See if you can pick my additions :spank:

http://www.fortheboyz.com/cars/merli.php

Trust 10 Row Oil Cooler w/ Oil Filter Relocation Kit

HKS Vernier Cam Gears

NISMO Triple Plate G-Max Clutch

Thats about it engine wise. Did you change the pressure reg? We put an APEX one on it.

Kept the APEXi fuel regulator on there... It was doing fine... I wasn't even stressing out the injectors...

I also added the Trust Type-R BOV on there... You guys didn't deem a BOV necessary for a turbo capable of 1.8 bar boost?!??!? What was up with that?

A couple of other additions :)

Blitz SBC-ID Boost Controller

Blitz PowerMeter-ID

APEXi Turbo Timer

Pivot Shift Light

Cusco Carbon Fibre Front Strut Brace

Recaro SR Front Seats

AP Racing 6 Piston Calipers

DBA 332mm 'Kangaroo Paw' Slotted Rotors

BF Goodridge Braided Brake Lines

Ferrodo DS3000 (Track) / DS2500 (Road) Brake Pads

WORK VS-SS 18x8 / 18x9 Wheels

Front Tyre - Falken AZENIS ST-115 (235/45ZR18)

Rear Tyre - Dunlop D01J R-Compound Tyres (265/35ZR18)

R33 GTR 17x9 Wheels

Dunlop D01J R-Compound Tyres (235/45ZR17)

Sony Dumbass Head Unit

Focal Polykevlar 6.5" Components

Focal Polyglass 6.5" Co-Axial Rear Fill

Focal Polykevlar 13" Subwoofer

MTX 4244 - 4 Channel Amplifier

MTX 6500D - MonoBlock Amplifier

Hey Andrew, I don't suppose you know anyone with a near stock R33 GTS-T?

I'm in the process of making up some cooler/plenum kits for them but the car I've got here has been in an accident and doesn't have a stock A/C fan, making intercooler positioning difficult. If someone is willing to donate their car for a few days they will end up with an extremely nice setup for a very good price :)

Hey Andrew, I don't suppose you know anyone with a near stock R33 GTS-T?

I'm in the process of making up some cooler/plenum kits for them but the car I've got here has been in an accident and doesn't have a stock A/C fan, making intercooler positioning difficult. If someone is willing to donate their car for a few days they will end up with an extremely nice setup for a very good price  :)

Mark, I'm sure if you started a thread asking for volunteers, you'd have an line 50 people long outside your workshop :spank:

Everyone wants to get rid of the standard plenum... B-Man on these forums took a standard plenum and flow tested it and the results were abysmal!!

I thought there would at least be air guides/fins inside the plenum directing airflow for even distribution, but it's just hollow in there...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...