Jump to content
SAU Community

Introducing Myself :)

Lucaas

By Lucaas,
in New South Wales

 Share

Recommended Posts

oweban Grand Master

oweban

Posted
Posted
Yeah dont stress about the motor or power, wait till you're off your p plates then go wild on it

+1, not only because then it's legal, but by then you'll have much more experience behind the wheel. I got my car after I'd been off my P's for years and it still scared the shit out of me at first.

Mosullivan Rising Star

Mosullivan

Posted
Posted
+1, not only because then it's legal, but by then you'll have much more experience behind the wheel. I got my car after I'd been off my P's for years and it still scared the shit out of me at first.

+1 for that as well, pulling out of dealership and hitting boost for the first time on Parramatta road at 5pm is quite an experience.

oweban Grand Master

oweban

Posted
Posted
+1 for that as well, pulling out of dealership and hitting boost for the first time on Parramatta road at 5pm is quite an experience.

Haha, can imagine it would be! :) "OH SHIT A CAR IN FRONT OF ME"

At that stage I was running less than 200rwkw too, but going from an AU falcon station wagon with LPG to that.. wow.

GoldZilla Grand Master

GoldZilla

Posted
Posted
mate might need to hold that off abit. Gotta get some cash together to buy my car first :)

You don't HAVE to be a Skyline owner to become an SAU-NSW Club Member, and there are quite a few benefits (as noted by Terry) as well as a en extra part of the forums available to you should you decide to join!

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      I definitely know the first rule here, look first, ask second. I've seen many people get roasted 😂 I found a few diagrams for the RB, but I'm yet to come across one for the VQ. From what I have read, the pump gets the +12v along with the FPCM, and it's the negative wire that gets passed through the resistor to regulate the voltage. So I assume I can just ground the negative wire at the pump to eliminate the FPCM control. But I really wanted to see the VQ circuit diagram first to make sure I understood it correctly. Once the new pump is in I'll do some testing to see how it behaves, and in the meantime, I'll keep looking for a wiring diagram. Thanks for your help mate, your time is greatly appreciated.    
    • GTSBoy
      Jacks that fit under GTR lips that can reach the subframe?

      By GTSBoy · Posted

      Maybe? I have the Supercheap ToolPro low thingo. It has a somewhat smaller diameter lifting "bowl" than you would expect on a workshop grade trolley jack, and a split rubber pad to suit that diameter. It clears the "N1" style skirts I have. Probably wouldn't if the jack's bowl and a suitably larger rubber block were in use. Having said that though.....you only need the rubber block to exist on the inner side of the pinchweld, so could carve away any rubber that fouled the skirt, leaving some there for "insurance" </simples>
    • Kinkstaah
      Jacks that fit under GTR lips that can reach the subframe?

      By Kinkstaah · Posted

      I used to do that (sills with rubber jack block).. ... then I got side skirts, and there's no way for the jack to actually work there, the jack pad itself on the jack is too big. Is the answer to use a... smaller (?) jack? Hmmm.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      I have too much trauma from every skyline I've ever seen having crushed jack points/pinch welds lol.    Yep, works 100%, it's what I use when I'm using the quick jack. Don't know why I can't also bring myself to do the same thing when I'm using a jack. I blame the skyline PTSD. 
×
×
  • Create New...