Jump to content
SAU Community

Recommended Posts

People,

I got about 2 hrs of decent quality video from the drift day today.:wassup:

If you want some video of your car please tell me exactly which car you want.

It is going to take several hours of ripping, so do not expect any 48hr turnaround, it might not been untill next week as I have a life and wife.

I will onlt give these people who OWN the car at todays event, if you want a copy I will make them available to everyone

:( (the guys who dinged their cars please let me know if you want this made public domain.):)

Please PM me if you want YOUR video.

P.S I was the one with the tripod in the stand all day

ta

Mal

Link to comment
https://www.sau.com.au/forums/topic/32788-drift-day-video-240104/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

I agree....

I have been to most types of motorsport, and I found that one of the most intresting and enjoyable days I have ever had.

The day was well done and I will be driving in the next one.

Thanks to Aaron McGill and all the guys who stood in the sun and rain to keep the event flowing.

Guys,

I have decided that there are way to many cars to just give each person their car as it would take me hours just to get one car pulled out of 2 hrs of footage.

What I will do is make up a proper SAU NSW drift day video, put some music to it and some titles.

I will then rip it into hires and low res versions.

I hope this will suite everyone, I think it is a bit more fun.

P.S does anyone know the guy who banged his R31, I do not want to use this footage unless he lets me as he might want to try to claim insurance.....and this footage may stop his chances.

P.S I have the whole incident......

I do not care about the POS bommadore as I would doubt anyone would bother insuring it.

Ta

Mal

Ok, I have done the video,

Its 18min long.....but its 740MB in Size for the hires

and 92mb for the lowres. My home cable connection will only upload at @16k, so if someone has somewhere to host, please let me know, I will send it to you to host.

Looks good with great music.

Let me know if you wanna host it.

Ta

Mal

Ok guys,

I think the best thing to do is arrange to meet and I will hand out DVD's of the event.

As mentioned it is HiRes (740Mb) and it looks like it will be too large for most people without cable...etc to download.

Please let me know how many copies you want. I will only charge $5 each which will cover the cost of the DVD disk.

We will look at meeting up next Thursday night as I am busy most of next week.

Please make sure you put in your orders. I do not want to be stuffing around sending these things out, but I am also willing to help the guys out that are not on the northern beaches. If you can get a mate to pickup your copy.

Please also be aware that everyone's cars are not shown as I was following the guys that were northsiders/SAU/ worst/best drivers.

All the guys who PM'ed me (silver S15, Daz,Mat, Geoff, Pete) are all there.

Ta

Mal

Ha Yeah I own that HR31 Im cool with you keeping it on the vid insurance definatley dont like me today but anyhow if the drift was good just cut the spit when i got out cheers!. Hopefully the bitch will be ready by the next minus the f*#king HICAS (and some poor driving ability)

The video will not compress anymore.

It is in MPEG2 format for DVD, so there is no more compression.

I figure it is better to have decent quality video, I can rip it in most formats, but they are either larger or their quality sux.

Ta

Mal

I might as well use this topic...

I've just finished editing my version of the day's proceedings, just under seven minutes.

It's an MPEG1 file, so it should run on any computer.

I'll be handing out CD's at the Initial Drift event this Wednesday at Eastern Creek, and after that, I suppose I'll get a few copies to people who can then get them out to the rest of you.:devil:




  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...