Jump to content
SAU Community

Recommended Posts

Hi all, havin problems with my aerial since I went to put my tv in car, that wouldn't work, so I put the other cd player back in and now the aerial won't go up and down even though it's hooked, and the clock is dull like it's going flat. Any help would be great.

Link to comment
https://www.sau.com.au/forums/topic/328042-r33-aerial-and-clock/
Share on other sites

sounds like u have blown a fuse. dont worry its easy to fix. u know the fuse compartment on the drivers side in the car? look in there and i think its a acc fuse i could be wrong just check them all and replace. i had similar thing happen to me so i checked each fuse (stupid Japanese righting :laugh: )

the reason. because u were drawing over the 20A that the fuse is made to brake at when u put the TV in the car

Well i tried all the fuses, none blown, not sure what else, clock doesnt have any power now, dead. i will pull off the surround again and look to make sure everything is right behind there, but im 100% sure it is. Any other clues.

i dont know what else it could be... maybe a angry wire that is earthing out? but then the fuse would have blown.

hmmm maybe get the audio wire diagram for your car and for ur head unit and check that everything is were it should be

low voltage on the line for the power antenna or bad ground on antenna and or radio.

clock dim ??? lcd or fluro type clock lights?

I would guess low voltage on that circuit, if the fuse was blown it wouldnt work at all

clock LED only needs a few volts, power antenna needs 12v

Well after searching this site, there has been alot of people with the issue over the years asking about it, but i have not read how they fixed it, did they simply give up and rewire the clock, and in my case my aerial wont go up and down. I have checked everything that i can think of or see and its got me stuffed. Usually im actually quite good at finding issues like this, but not this one. Oh well keep searching for a answer. Thanks to anyone who knows how to solve it.

check the voltage output to the antenna? 12v ?

clock can fail, old nissan clocks did all the time ?

got a photo of it to see ?

antenna ,does it even make motor noise when the radio comes on? if so it's got a broken plastic winder thing inside and most can be fixed

some aftermarket/oem ones use a relay to boost current to put the antenna up? have you investigated that?

I did look around at relay but couldn't see one that it would come under, going to pull aerial connections of this afternoon as I finish at 1 on Fridays so I will actually have some daylight. If I can figure it out, I will just rewire the aerial with it's own online fuse, same with clock if I have too. It's just odd cause the constant power wire for the head deck is only pushin just over 2v all the time, I have to run my own just to get it to work. But thanks to everyone that's tried to help so far.

Well everything is working again, I lost my indicators last night, checked all the fuses and nothing blown, but they still flashed with the alarm, so I checked fuses avian and found one dead, put that back in and clock and aerial started working, but still no indicators, then I fiddled putting the fuse in all the way it can and just tested once more and there they were. I must have a loose connection behind the fuse box, cause I triple checked all the fuses the other day and none were blown. The whole fuse box inside the panel moves so it would not suprise me. So sorry I don't have a solution for anyone else who has this problem, all I can say is check third fuse up from the bottom, left side in side the car, that's the one that ended up shitting itself.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...