Jump to content
SAU Community

Recommended Posts

This is an open invitation to all skyline owners. Calder park off street drags are on again sat the 24th July. Gates open 11am. Racing 2pm-8pm . ScruTineering 12pm-4pm and spectators gates open at 1pm. Would be awesome to get a big skyline turnout . If people begin to take interest I will organise a premeet on the west ring road most likley at the mcdonalds outbound. The cost of racing on the day is $80 for one car +1 pit crew. Spectators fee is $25 each. Regards James

Link to comment
https://www.sau.com.au/forums/topic/328610-calder-park-24th-july/
Share on other sites

So just to confirm for people who want to premeet here's the info: July 24 th , 11am-12pm meet at mobil/ mcdonalds service station on the west ring road outbound! I just checked the weather 14 degrees and sunny this should be a great day of racing can't wait people!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...